Career
Contact

ORALITE® 5600
Fleet Engineer Grade

ORALITE® 5600 Fleet Engineer Grade is a rough, weather and solvent resistant product which unifies high flexibility and excellent corrosion resistance. The material can be cut to size in the plotter and has been specially designed for demanding commercial applications and fleet decorations to create lettering, markings and decorations. It is designed for applications where a decommissioning is possible. Because of a special PVC cast structure the material can also be attached on moderately curved surfaces with rivets or corrugated substrates. ORALITE® 5600 consists of catadioptric glass beads that are attached to a transparent plastic material layer (design A, previously type I).
  • Reflective film with cast PVC surface, structure A, reflective values comparable to RA1
  • Available in 11 colors, film thickness without protective paper 0.150mm
  • Highly flexible film: Adapts perfectly to beads and rivets
  • Removable under the influence of heat
  • No edge sealing required
  • Long-term use: Expected service life of up to 7 years when used correctly

Product information

Technical properties

Resistance

Durability 7 Year(s) with professional processing, with vertical outdoor weathering, central European normal climate
Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Elongation at break Minimum elongation at break along: 100 %
Minimum elongation at break across: 100 % 		DIN EN ISO 527
Tensile strength Minimum tensile strength along: 0 MPa
Minimum tensile strength across: 0 MPa
Temperature resistance Minimum temperature: -50 °C
Maximum temperature: 95 °C 		bonded to aluminum, normal Central European climate

Adhesive properties

Removability Removable The use of heat helps with easily removing the product.
Adhesive power 15 N/25 mm after 24 h, adhered on stainless steel | Average value, FINAT TM 1
16 N/25 mm after 24 h, adhered on acrylic varnish | Average value, FINAT TM 1
Processing
Recommended printing procedure Screen printing, Digital printing with solvent-based inks, UV printing, Latex printing
Application temperature Minimum temperature 10 °C
Proposed application technology Dry application
Product Construction
Liner Liner: Silicone cardboard PE coated on both sides
Surface weight: 145 g/m²
Adhesive Solvent-polyacrylate

General

Thickness 0.15 mm Average value, without protective paper
Reflective Characteristics
Reflective Technology Glass bead
Reflectivity Compliance Reflective film structure: Design A
Reflectivity classes: RA1
Dimensions
Format Roll
Standard width 610 mm
1235 mm
760 mm only available in white
1370 mm only available in white
1520 mm only available in white
Standard length 25 m
50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Recommended products

Area

Recommended Products

ORAGUARD® 290

3D adhesive, cast premium PVC laminating film with high dimensional stability and highly effective UV protection. Suitable for long-term outdoor...

Go to: ORAGUARD® 290

ORAGUARD® 290DU

3D adhesive, cast premium PVC laminating film with high dimensional stability, highly effective UV protection, and reduced silvering when applied to UV-cured printing inks. Suitable for long-term...

Go to: ORAGUARD® 290DU

ORAGUARD® 290F

Transparent, moulded premium PVC protection film with glossy surface and highest UV protection.

Go to: ORAGUARD® 290F

ORAGUARD® 293

Ultra flexible, transparent Premium Cast PVC Film with highly effective UV protection. Surface glossy and matt.

Go to: ORAGUARD® 293

ORAGUARD® 293F

Ultra flexible, transparent Premium Cast PVC Film with highly effective UV protection. Surface glossy.

Go to: ORAGUARD® 293F

ORATAPE® LT72 Application Tape

Half-transparent transfer paper with high form stability and moisture resistance for the application of punched or computer-cut fonts and symbols. *on request

Go to: ORATAPE® LT72 Application Tape

ORATAPE® MT72 Application Tape

Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols.

Go to: ORATAPE® MT72 Application Tape

ORATAPE® MT95 Application Tape

Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.

Go to: ORATAPE® MT95 Application Tape

ORALITE® 5018 Screen Printing Ink

ORALITE® 5018 Screen Printing Ink is a solvent-based, one-component screen printing ink, which was specially developed for printing on all...

Go to: ORALITE® 5018 Screen Printing Ink
Back to top