ORACAL® 8510
Etched Glass Cal
Special PVC film with polymer plasticisers for glass decoration. The reduced surface gloss of the film prevents unwanted reflections. Available in the colours silver and gold as well as in different surface structures.
Product information
Technical properties
Resistance
| Resistance to cleaning agents | No change | adhered on acrylic glass, 8 h in detergent solution (0.5 % household detergent) at room temperature and 65 °C |
|---|---|---|
| Durability | Durability :with vertical outdoor exposure, normal Central European climate | |
| 7 Year(s) | ||
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50% relative humidity |
| Resistance to solvents and chemicals | Oils, Greases, Fuels, Weak acids, Salts and alkalis, Isopropyl alcohol, Washing suds (0.5 % household cleaner) | At room temperature |
| Maximum shrinkage |
Maximum shrinkage along 0.2 mm
Maximum shrinkage across 0 mm |
adhered on glass | FINAT TM 14 |
| Elongation at break |
Minimum elongation at break along 130 %
Minimum elongation at break across 150 % |
DIN EN ISO 527 |
| Tensile strength |
Minimum tensile strength along: 19 N/mm² Minimum tensile strength across: 19 N/mm² |
EN ISO 527 |
| Temperature resistance |
Minimum temperature: -40 °C Maximum temperature: 60 °C |
bonded to acrylic glass, normal Central European climate |
Adhesive properties
| Adhesive power | 18 N/25 mm | after 24 h, on stainless steel | Average value, FINAT TM 1 |
|---|---|---|
| 16 N/25 mm | product.properties.technical_attributes.adhesive_properties.adhesive_strength_block.adhesive_strength_condition.id.474.03d09b2a | product.properties.technical_attributes.adhesive_properties.adhesive_strength_block.adhesive_strength_note.id.474.03d09b2a | |
| Adhesive | Permanent |
Processing
| Application temperature | Minimum temperature 10 °C |
|---|---|
| Proposed application technology | Wet application |
Product Construction
| Front material |
Thickness front material: 0.08 mm Front material: Polymer PVC film |
|---|
General
| Thickness | 0.08 mm | Average value, without adhesive and protective paper |
|---|
Dimensions
| Format | Roll | |
|---|---|---|
| Standard width | 1520 mm | only available in silver grey |
| 1260 mm | ||
| 1000 mm | ||
| Standard length | 50 m |
Downloads
Technical documents
Processing notes - English (EN)
PDF, 107.18kB, 3 Pages
Product information - English (EN)
PDF, 200.58kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2026-02-04.
Certificates
Certificate document - English (EN)
PDF, 202.82kB, 1 Page
Certificate document - English (EN)
PDF, 0.96MB, 3 Pages
Catalogue
Images and videos
Recommended products
Recommended Products
ORATAPE® HT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® LT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® LT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® MT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT72 Application Tape
Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT80P Application Tape
Transparent mounting film on PVC basis, covered, for the transfer of punched or computer-cut lettering and symbols.
