Technical data sheet - English (EN)
PDF, 53.37kB, 1 Page
ORAMASK® 810S
Stencil Film
Translucent dark grey coloured special PVC film with matt surface.
Product information
Technical properties
Resistance
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
|---|---|---|
| Resistance to solvents and chemicals | Oils, Greases, Sulphuric acid (10 %), Hydrochloric acid (10 %), Solvent | at room temperature |
| Elongation at break |
Minimum elongation at break along: 130 % Minimum elongation at break across: 150 % |
DIN EN ISO 527 |
| Tensile strength |
Minimum tensile strength along: 19 MPa Minimum tensile strength across: 19 MPa |
EN ISO 527 |
| Temperature resistance |
Minimum temperature: -40 °C Maximum temperature: 60 °C |
short-term up to +80 °C |
Adhesive properties
| Adhesive power | 1 N/25 mm | after 24 h, on stainless steel | FINAT TM 1, average value |
|---|---|---|
| Adhesive | Removable |
Processing
| Application temperature | Minimum temperature 10 °C |
|---|
Product Construction
| Liner |
Liner: One-sided siliconized kraft paper Surface weight: 135 g/m² |
Average value |
|---|---|---|
| Front material |
Thickness front material: 0.08 mm Front material: Partially polymer PVC film |
Average value |
General
| Thickness | 0.08 mm | without protective liner and adhesive, average value |
|---|
Dimensions
| Format | Roll |
|---|---|
| Standard width | 500 mm |
| 630 mm | |
| 1000 mm | |
| 1260 mm | |
| Standard length | 50 m |
Downloads
Technical documents
Product information - English (EN)
PDF, 140.26kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
Catalogue
Recommended products
Recommended Products
ORATAPE® HT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® LT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® LT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® MT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT72 Application Tape
Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT80P Application Tape
Transparent mounting film on PVC basis, covered, for the transfer of punched or computer-cut lettering and symbols.
ORATAPE® MT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
