Technical data sheet - English (EN)
PDF, 88.17kB, 1 Page
ORAJET® 3550
Polymer PVC film, white glossy
Product information
Technical properties
Resistance
| Durability | 7 Year(s) | with vertical outdoor weathering, central European normal climate; unprinted |
|---|---|---|
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
| Resistance to solvents and chemicals | Oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis | at room temperature, 72 h after adhesion on aluminium | resistant in short-term against most |
| Maximum shrinkage |
Maximum shrinkage along: 0.2 mm Maximum shrinkage across : 0 mm |
Bonded to steel | no measurable shrinkage in transverse direction, FINAT TM 14 |
| Elongation at break |
Minimum elongation at break along: 130 % Minimum elongation at break across: 150 % |
DIN EN ISO 527 |
| Tensile strength |
Minimum tensile strength along: 19 MPa Minimum tensile strength across: 19 MPa |
EN ISO 527 |
| Seawater resistance | Tested | adhered on aluminium, after 100 h/23 °C no change, DIN 50021 |
| Temperature resistance |
Minimum temperature: -50 °C Maximum temperature: 90 °C |
adhered on aluminium, central European normal climate |
Adhesive properties
| Adhesive power | 18 N/25 mm | after 24 h, on stainless steel | FINAT TM 1, average value |
|---|---|---|
| Adhesive | Permanent | repositionable with permanent end adhesion |
Processing
| Recommended printing procedure | Inkjet printing with solvent-based inks, Inkjet printing with UV inks, Inkjet printing with latex inks |
|---|---|
| Application temperature | Minimum temperature 8 °C |
Product Construction
| Liner |
Liner: PE-coated paper on both sides, siliconised on one side Surface weight: 143 g/m² |
|---|---|
| Front material |
Thickness front material: 0.07 mm Front material: Polymer PVC film |
| Adhesive | Solvent-polyacrylate |
General
| Thickness | 0.07 mm | without protective liner and adhesive, average value |
|---|
Dimensions
| Format | Roll |
|---|---|
| Standard width | 1600 mm |
| 1520 mm | |
| 1370 mm | |
| 1050 mm | |
| Standard length | 50 m |
Downloads
Technical documents
Processing notes - English (EN)
PDF, 57.51kB, 2 Pages
Product information - English (EN)
PDF, 140.65kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
Catalogue
Digital Printing Materials - English (EN)
PDF, 1.77MB, 11 Pages
Recommended products
Recommended Products
ORAGUARD® 293
Ultra flexible, transparent Premium Cast PVC Film with highly effective UV protection. Surface glossy and matt.
ORAGUARD® 215
Polymeric PVC laminating film with highly effective UV protection. For long-term outdoor applications.
ORAGUARD® 215DU
Polymer PVC laminating film with highly effective UV protection and reduced silvering when applied to UV-cured printing inks. Suitable for...
ORAGUARD® 290
3D adhesive, cast premium PVC laminating film with high dimensional stability and highly effective UV protection. Suitable for long-term outdoor...
ORAGUARD® 290DU
3D adhesive, cast premium PVC laminating film with high dimensional stability, highly effective UV protection, and reduced silvering when applied to UV-cured printing inks. Suitable for long-term...
ORAGUARD® 290F
Transparent, moulded premium PVC protection film with glossy surface and highest UV protection.
ORAGUARD® 293F
Ultra flexible, transparent Premium Cast PVC Film with highly effective UV protection. Surface glossy.
