Technical data sheet - English (EN)
PDF, 1.33MB, 2 Pages
ORACAL® 8610
Etched Glass Film
Special PVC film with a fine etched-glass appearance for high-quality glass decoration. Its medium glossy surface prevents unwanted reflections. The film offers long-term durability on glass surfaces and is also suitable for outdoor use. Developed for glass areas to achieve a hoar-frost effect or an impression of etched, cut, or sandblasted glass, especially for decorative designs of shop windows, mirrored surfaces, and glass doors.
- Increased durability compared to ORACAL 8510
- Weather-resistant and suitable for outdoor use
- Fine etched-glass appearance for sophisticated design applications
Available colours
1 Colors
090S
Silver grey
satin gloss
125 129 132 (sRGB)
Product information
Technical properties
Resistance
| Durability | 10 Year(s) | Maximum durability applies under vertical outdoor exposure, provided the material is properly processed, maintained and used. |
|---|---|---|
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
| Elongation at break |
Minimum elongation at break along: 80 % Minimum elongation at break across: 80 % |
DIN EN ISO 527 |
| Tensile strength |
Minimum tensile strength along: 20 MPa Minimum tensile strength across: 20 MPa |
DIN EN ISO 527 |
| Temperature resistance |
Minimum temperature: -50 °C Maximum temperature: 90 °C |
adhered on aluminium | no change |
Adhesive properties
| Adhesive power | 16 N/25 mm | FINAT TM 1, after 24h | glass |
|---|---|---|
| 16 N/25 mm | FINAT TM 1, after 24h | acrylic glass |
Product Construction
General
| Thickness | 0.06 mm |
|---|
Dimensions
| Format | Roll |
|---|---|
| Standard width | 1260 mm |
| Standard length | 50 m |
Downloads
Technical documents
Processing notes - English (EN)
PDF, 107.18kB, 3 Pages
Product information - English (EN)
PDF, 140.88kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
Certificates
Certificate document - English (EN)
PDF, 1.47MB, 3 Pages
Images and videos
Recommended products
Recommended Products
ORATAPE® HT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® LT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® LT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® MT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT72 Application Tape
Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT80P Application Tape
Transparent mounting film on PVC basis, covered, for the transfer of punched or computer-cut lettering and symbols.
