Technical data sheet - English (EN)
PDF, 77.66kB, 1 Page
ORACAL® 8530
Etched Glass Cal
Special PVC film with polymer plasticisers for glass decoration. The reduced surface gloss of the film prevents unwanted reflections. Available in silver with different surface structures.
Product information
Technical properties
Resistance
| Resistance to cleaning agents | No change | adhered on glass, 8 h in detergent solution (0.5 % household detergent) at room temperature and at 65 °C |
|---|---|---|
| Durability | 5 Year(s) | with professional processing, with vertical outdoor weathering, central European normal climate |
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
| Resistance to solvents and chemicals | Oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis | at room temperature 72 h after adhesion on aluminium |
| Maximum shrinkage |
Maximum shrinkage along: 0.2 mm Maximum shrinkage across : 0 mm |
adhered on glass | FINAT TM 14 |
| Elongation at break |
Minimum elongation at break along: 130 % Minimum elongation at break across: 150 % |
DIN EN ISO 527 |
| Tensile strength |
Minimum tensile strength along: 19 MPa Minimum tensile strength across: 19 MPa |
EN ISO 527 |
| Temperature resistance |
Minimum temperature: -40 °C Maximum temperature: 90 °C |
bonded to glass, normal Central European climate |
Adhesive properties
| Adhesive power | 6 N/25 mm | after 24 h, on stainless steel | FINAT TM 1 |
|---|---|---|
| Adhesive | Removable |
Processing
| Application temperature | Minimum temperature 8 °C |
|---|---|
| Proposed application technology | Wet application |
Product Construction
| Front material |
Thickness front material: 0.08 mm Front material: Polymer PVC film |
|---|---|
| Adhesive | Solvent-polyacrylate |
General
| Thickness | 0.08 mm | Average value, without protective liner and adhesive |
|---|
Dimensions
| Format | Roll |
|---|---|
| Standard width | 1260 mm |
| Standard length | 50 m |
Downloads
Technical documents
Processing notes - English (EN)
PDF, 107.18kB, 3 Pages
Product information - English (EN)
PDF, 141.06kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
Catalogue
Images and videos
Recommended products
Recommended Products
ORATAPE® HT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® LT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® LT72 Application Tape
Half-transparent transfer paper with high form stability and moisture resistance for the application of punched or computer-cut fonts and symbols. *on request
ORATAPE® LT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® MT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT72 Application Tape
Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT80P Application Tape
Transparent mounting film on PVC basis, covered, for the transfer of punched or computer-cut lettering and symbols.
ORATAPE® MT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
