Technical data sheet - English (EN)
PDF, 55.18kB, 1 Page
Translucent special PVC film with even colouring in incident and transmitted light. The reduced surface gloss of the film prevents unwanted reflections.
Resistance to cleaning agents | No change | adhered on acrylic glass, 8 h in detergent solution (0.5 % household detergent) at room temperature and 65 °C |
---|---|---|
Durability | Durability (general note):with professional processing, with vertical outdoor weathering, central European normal climate | |
7 Year(s) | Black, white, coloured | |
5 Year(s) | metallic | |
Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
Resistance to solvents and chemicals | Oils, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis | short-term |
Tensile strength |
Minimum tensile strength along: 19 MPa Minimum tensile strength across: 19 MPa |
EN ISO 527 |
Adhesive | Permanent |
---|
Recommended printing procedure | Digital thermal transfer printing | Digital thermal transfer printing is only recommended for silky glossy surface quality in white. |
---|---|---|
Application temperature | Minimum temperature 8 °C |
Liner | Silicone cardboard coated on one side |
---|---|
Front material |
Thickness front material: 0.08 mm Front material: Polymer PVC film |
Adhesive | Solvent-polyacrylate |
Thickness | 0.08 mm | Average value, without protective liner and adhesive |
---|
Format | Roll |
---|---|
Standard width | 1260 mm |
1000 mm | |
630 mm | |
Standard length | 50 m |
PDF, 55.18kB, 1 Page
PDF, 107.18kB, 3 Pages
PDF, 89.38kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.
PDF, 1.77MB, 11 Pages
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols. *on request
Transparent mounting film on PVC basis, covered, for the transfer of punched or computer-cut lettering and symbols.
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.