Technical data sheet - English (EN)
PDF, 217.49kB, 2 Pages
ORACAL® 6510
Fluorescent Cast
Moulded PVC film with a high degree of attention thanks to its intense lighting effect in all daylight conditions. Especially effective at dawn and dusk and other poor visibility conditions.
Available colours
7 Colours
029G
Yellow fluorescent
Glossy
222 250 4 (sRGB)
037G
Orange fluorescent
Glossy
250 121 2 (sRGB)
038G
Red orange fluorescent
Glossy
248 44 5 (sRGB)
357G
Orange red fluorescent
Glossy
248 28 7 (sRGB)
039G
Red fluorescent
Glossy
247 15 9 (sRGB)
046G
Pink fluorescent
Glossy
246 14 136 (sRGB)
069G
Green fluorescent
Glossy
58 208 0 (sRGB)
Product information
Technical properties
Resistance
| Durability | Durability (general note):with professional processing, with vertical outdoor weathering, central European normal climate | |
|---|---|---|
| 1 Year(s) | all colours, unprinted | |
| 2 Year(s) | Yellow fluorescent, unprinted | |
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
| Maximum shrinkage |
Maximum shrinkage along: 0.3 mm Maximum shrinkage across : 0 mm |
bonded to steel | FINAT TM 14 |
| Elongation at break |
Minimum elongation at break along: 100 % Minimum elongation at break across: 199 % |
DIN EN ISO 527 |
| Tensile strength |
Minimum tensile strength along: 13 MPa Minimum tensile strength across: 13 MPa |
EN ISO 527 |
| Seawater resistance | Tested | adhered on aluminium | DIN 50021, after 100 h/ 23 °C no change |
| Temperature resistance |
Minimum temperature: -40 °C Maximum temperature: 105 °C |
adhered on aluminium, central European normal climate |
Adhesive properties
| Adhesive power | 16 N/25 mm | after 24 h, on stainless steel | Average value, FINAT TM 1 |
|---|---|---|
| Adhesive | Permanent |
Processing
| Recommended printing procedure | Screen printing |
|---|---|
| Application temperature | Minimum temperature 8 °C |
Product Construction
| Adhesive | Solvent-polyacrylate |
|---|
General
| Thickness | 0.11 mm | Average value, without protective liner and adhesive |
|---|
Dimensions
| Format | Roll, Sheets | |
|---|---|---|
| Standard width | 1260 mm | |
| 1000 mm | ||
| Standard length | 50 m | |
| Standard dimensions sheets | 700 mm X 500 mm | |
| 700 mm X 1000 mm | ||
| 1400 mm X 1000 mm |
Downloads
Technical documents
Processing notes - English (EN)
PDF, 107.18kB, 3 Pages
Product information - English (EN)
PDF, 140.84kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
Catalogue
Printing Materials - English (EN)
PDF, 2.21MB, 11 Pages
Images and videos
Recommended products
Recommended Products
ORATAPE® HT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® LT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® LT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
ORATAPE® MT52 Application Tape
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT72 Application Tape
Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols.
ORATAPE® MT80P Application Tape
Transparent mounting film on PVC basis, covered, for the transfer of punched or computer-cut lettering and symbols.
ORATAPE® MT95 Application Tape
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
