Technical data sheet - English (EN)
PDF, 275.36kB, 1 Page
Highly flexible special PVC film with silk-gloss surface.
Durability | 3 Year(s) | with professional processing, with vertical outdoor weathering, central European normal climate |
---|---|---|
Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
Resistance to solvents and chemicals | Oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis | at room temperature, 72 h after adhesion on aluminium |
Tensile strength |
Minimum tensile strength along: 15 MPa Minimum tensile strength across: 15 MPa |
EN ISO 527 |
Seawater resistance | Tested | adhered on aluminium | DIN 50021, after 100 h/ 23 °C no change |
Water resistance | Tested |
Adhesive power | 14 N/25 mm | after 24 h, on stainless steel | Average value, FINAT TM 1 |
---|---|---|
Adhesive | Permanent |
Application temperature | Minimum temperature 8 °C |
---|
Liner | Silicone cardboard coated on one side |
---|---|
Front material |
Thickness front material: 0.08 mm Front material: Special PVC film |
Adhesive | Solvent-polyacrylate |
Thickness | 0.08 mm | Average value, without protective liner and adhesive |
---|
Reflective Technology | Prismatic |
---|---|
Reflectivity Compliance | Reflective film structure: Design A |
Reflectivity classes: RA1 |
Format | Roll |
---|---|
Standard width | 1260 mm |
1000 mm | |
Standard length | 50 m |
PDF, 275.36kB, 1 Page
PDF, 107.18kB, 3 Pages
PDF, 89.38kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.
PDF, 1.77MB, 11 Pages
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.
Half-transparent mounting paper for the transfer of punched or computer-cut fonts and symbols.
Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols. *on request
Transparent mounting film on PVC basis, covered, for the transfer of punched or computer-cut lettering and symbols.
Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.