Career
Contact

ORABOND® 1325
Transfer Tape

The transfer adhesive tape consists of a high-performance modified acrylate adhesive, that has a good resistance against UV radiation, temperature stress, chemicals and solvents as well as moisture. The adhesive is characterised by an excellent permanent adhesion on metal, painted and highly energetic plastic surfaces as well as very good permanent adhesion low-energetic surfaces.

Product information

Technical properties

Resistance

Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 150 °C 		short-term up to +180 °C, central European normal climate

Adhesive properties

Adhesive power 23 N/25 mm after 1 min, on stainless steel | FINAT TM 1, covered on one side with 0.05 mm polyester film, average value
25 N/25 mm after 20 min, on stainless steel | FINAT TM 1, covered on one side with 0.05 mm polyester film, average value
27 N/25 mm after 24 h, on stainless steel | FINAT TM 1, covered on one side with 0.05 mm polyester film, average value
Maximum shear strength 500 Hour(s) at 23 °C, on stainless steel | FINAT TM 8, covered on one side with 0.05 mm polyester film
10 Hour(s) at 70 °C, on stainless steel | FINAT TM 8, covered on one side with 0.05 mm polyester film
Processing
Application temperature Minimum temperature 15 °C
Product Construction
Liner Liner: PE paper siliconised on both sides
Surface weight: 100 g/m²
Adhesive covered side Modified acrylate
Dimensions
Format Roll, Cut
Standard width 305 mm
610 mm
1220 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Back to top