Career
Contact

ORALITE® 5921M
Prismatic Fleet Marking Grade

ORALITE® reflective films series 5921M Prismatic Fleet Marking Grade are highly flexible, weatherproof, self-adhesive, retroreflective films with excellent corrosion and solvent resistance. The ORALITE® 5921M series is particularly suitable for the use as vehicle warning markings and can be removed from painted surfaces under the influence of heat. The films are foreseen for the medium-term outdoor use. The material is available with the imprint required for vehicle warning markings in accordance with ECE regulation 104 both as an application pack and in the form of rolls. The film can also be used for the manufacturing of warning marking signs according to ECE regulation 70. The reflector system consists of mirrored microprisms, which achieve high reflective values thanks to their special design. When cutting the product no open cells occur. Edge sealing is therefore not required. The reflective film is printed in a manufacturer-specific pattern as in Figure 1, which also allows for the identification of the running direction. The relevant national provision have to be considered during the adhesion of the product. The product fulfils the regulation EU 2015/208.

Product information

Technical properties

Resistance

Resistance to cleaning agents No change adhered on aluminium | 8 h in detergent solution (0.5 % household cleaner) at room temperature and 65 °C
Durability 5 Year(s) unprinted, with professional processing, with vertical outdoor weathering, central European normal climate
Shelf Life 1 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Resistance to solvents and chemicals Mineral oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis with professional bonding
Seawater resistance Tested adhered on aluminium | DIN 50021, after 100 h/ 23 °C no change
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 82 °C 		adhered on aluminium, central European normal climate

Adhesive properties

Removability Removable can be removed under the influence of heat
Adhesive power 15 N/25 mm after 24 h, on stainless steel | Average value, FINAT TM 1
Processing
Application temperature Minimum temperature 10 °C
Product Construction

General

Thickness 0.34 mm Average value, without protective paper
Front material Thickness front material: 0.28 mm
Front material: Polymer PVC film
Reflective Characteristics
Reflective Technology Prismatic
Dimensions
Format Roll, Cut
Cutting roll width 141 mm x 9 m
282 mm x 9 m (set of left + right)
Standard width 141 mm
282 mm
1200 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Back to top