Technical data sheet - English (EN)
PDF, 93.14kB, 2 Pages
ORAGUARD® 244G
Anti-Graffiti Film
Highly transparent special film with ethylene tetrafluoroethylene surface (ETFE), glossy, with excellent anti-graffiti effect and excellent form stability. Graffiti can be removed dry or rapidly with suitable solvents, without damaging the film surface.
Product information
Technical properties
Resistance
| Durability | 10 Year(s) | On printed films (solvent or latex print) | Applies for vertical outdoor weathering, central European normal climate |
|---|---|---|
| 7 Year(s) | On colour films | Applies for vertical outdoor weathering, central European normal climate | |
| 5 Year(s) | On metallic films | Applies for vertical outdoor weathering, central European normal climate | |
| 10 Year(s) | On varnished surfaces | Applies for vertical outdoor weathering, central European normal climate | |
| 4 Year(s) | On stainless steel | Applies for vertical outdoor weathering, central European normal climate | |
| Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
| Resistance to solvents and chemicals | Water, Cleaning agent, Alcohol, Aliphatic solvents | at room temperature, 72 h after adhesion on aluminium | short exposure times of ketones and esters do not result in any change. |
| Maximum shrinkage |
Maximum shrinkage along: 0.3 mm Maximum shrinkage across : 0.3 mm |
adhered on aluminium | FINAT TM 14, average value |
| Elongation at break |
Minimum elongation at break along: 70 % Minimum elongation at break across: 70 % |
DIN EN ISO 527 |
| Tensile strength |
Minimum tensile strength along: 15 MPa Minimum tensile strength across: 15 MPa |
EN ISO 527 |
| Temperature resistance |
Minimum temperature: -50 °C Maximum temperature: 90 °C |
Bonded to aluminum, short-term load |
Adhesive properties
| Adhesive power | 12 N/25 mm | after 24 h, on stainless steel, average value | FINAT TM 1 |
|---|---|---|
| Adhesive | Permanent |
Processing
| Application temperature | Minimum temperature 8 °C |
|---|
Product Construction
| Liner | Polyester film, siliconised on one side |
|---|---|
| Front material |
Thickness front material: 0.07 mm Front material: Special EFTE film |
| Adhesive | Solvent-polyacrylate |
General
| Thickness | 0.07 mm | without protective liner and adhesive, average value |
|---|
Dimensions
| Format | Roll |
|---|---|
| Standard width | 1260 mm |
| Standard length | 50 m |
Downloads
Technical documents
Product information - English (EN)
PDF, 139.54kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
