Technical data sheet - English (EN)
PDF, 281.58kB, 2 Pages
ORACAL® 961
Caravan Film Premium Cast
Moulded premium PVC film, with excellent adhesive properties on difficult substrates, in glossy white, black, silver grey, yolk yellow (further colours on request)
Product information
Technical properties
Resistance
| Durability | 10 Year(s) | Black, white, applies for vertical outdoor weathering and central European normal climate | Maximum durability with professional processing and proper care and use |
|---|---|---|
| 8 Year(s) | coloured, applies for vertical outdoor weathering and central European normal climate | Maximum durability with professional processing and proper care and use | |
| 6 Year(s) | Metallic: silver grey, applies for vertical outdoor weathering and central European normal climate | Maximum durability with professional processing and proper care and use | |
| Shelf Life | 2 Year(s) | * in original packaging, at 20 °C and 50 % relative humidity |
| Resistance to solvents and chemicals | Aliphatic solvents, Oils, Greases, Fuels, Weak acids, Salts and alkalis | at room temperature, 72 h after adhesion on aluminium |
| Maximum shrinkage |
Maximum shrinkage along: 0.2 mm Maximum shrinkage across : 0.2 mm |
product.properties.technical_attributes.durability.maximum_shrinkage_block.maximum_shrinkage_transverse_conditon.id.487.a286f1b4 | product.properties.technical_attributes.durability.maximum_shrinkage_block.maximum_shrinkage_transverse_note.id.487.a286f1b4 |
| Elongation at break |
Minimum elongation at break along: 150 % Minimum elongation at break across: 150 % |
product.properties.technical_attributes.durability.elongation_at_break_block.elongation_at_break_transverse_note.id.487.c2f9e1f9 |
| Tensile strength |
Minimum tensile strength along: 21 MPa Minimum tensile strength across: 21 MPa |
Metallic: 19 MPa, EN ISO 527 |
| Seawater resistance | Tested | adhered on aluminium, 100 h/35 °C | no change, EN ISO 9227 |
| Temperature resistance |
Minimum temperature: -50 °C Maximum temperature: 120 °C |
product.properties.technical_attributes.durability.temperature_resistance_block.temperature_resistance_condition.id.487.3d2daf0f | product.properties.technical_attributes.durability.temperature_resistance_block.temperature_resistance_note.id.487.3d2daf0f |
Adhesive properties
| Adhesive power | 30 N/25 mm | after 24 h, stainless steel | FINAT TM 1 |
|---|---|---|
| Adhesive | Permanent | with high initial and final adhesion |
Processing
| Application temperature | Minimum temperature 4 °C |
|---|
Product Construction
| Liner | 137 g/m² |
|---|---|
| Front material |
Front material: Premium PVC film Manufacturing process: Moulded |
| Adhesive | Modified solvent polyacrylate |
General
| Thickness | 0.055 mm | Average value without protective paper and adhesive |
|---|
Dimensions
| Format | Roll |
|---|---|
| Standard width | 1260 mm |
| Standard length | 50 m |
Downloads
Technical documents
Processing notes - English (EN)
PDF, 144.10kB, 6 Pages
Product information - English (EN)
PDF, 140.46kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
