Career
Contact

ORACAL® 751C
High Performance Cast

Moulded high-performance PVC films for plotter applications with optimum cutting and processing properties, specially developed for labelling, marking and decorating. Suitable in particular for high-quality advertising on vehicles and means of transport. The special adhesive allows for adhesion on coated substrates, whether flat, uneven or curved, as well as in beads and over rivets. The surface is high-gloss, whereby white and black are additionally available in matt. 751C is suitable for the digital thermal transfer printing with resin ribbons.

Product information

Technical properties

Resistance

Resistance to cleaning agents No change adhered on aluminium
Durability Durability (general note):with professional processing and proper care and use, applies for vertical outdoor weathering and central European normal climate
8 Year(s) Black, white
7 Year(s) Transparent, coloured
5 Year(s) metallic
3 Year(s) Gold L
Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Resistance to solvents and chemicals Oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis at room temperature, 72 h after adhesion on aluminium
Tensile strength Minimum tensile strength along: 19 MPa
Minimum tensile strength across: 19 MPa 		EN ISO 527
Seawater resistance Tested adhered on aluminium | EN ISO 9227
Water resistance Tested at 23 °C, bonded on aluminium | after 100 h no change

Adhesive properties

Adhesive power 18 N/25 mm after 24 h, on stainless steel | Average value, FINAT TM 1
Adhesive Permanent
Processing
Recommended printing procedure Digital thermal transfer printing
Application temperature Minimum temperature 8 °C
Product Construction
Liner Special silicone cardboard coated on one side
Adhesive Solvent-polyacrylate

General

Thickness 0.06 mm Average value, without protective liner and adhesive
Dimensions
Format Roll
Standard width 1260 mm
1000 mm
630 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.

Recommended products

Area

Recommended Products

ORATAPE® HT95 Application Tape

Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.

Go to: ORATAPE® HT95 Application Tape

ORATAPE® LT95 Application Tape

Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.

Go to: ORATAPE® LT95 Application Tape

ORATAPE® MT72 Application Tape

Half-transparent mounting paper with high form stability and moisture resistance for the transfer of punched or computer-cut fonts and symbols. *on request

Go to: ORATAPE® MT72 Application Tape

ORATAPE® MT95 Application Tape

Transparent mounting film on polyethylene basis with a finely grained surface for transferring punched or computer-cut lettering and symbols.

Go to: ORATAPE® MT95 Application Tape
Back to top