Career
Contact

ORAJET® 3851
Digital Printing Film

Special PVC film with polymer plasticisers for glass decoration. The reduced surface gloss of the film prevents unwanted reflections. Available in silver grey (fine structure). *on request

Product information

Technical properties

Resistance

Durability 7 Year(s) Applies for vertical outdoor weathering, central European normal climate; unprinted
Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Maximum shrinkage Maximum shrinkage along: 0.2 mm
Maximum shrinkage across : 0 mm 		adhered on glass | no measurable shrinkage in transverse direction, FINAT TM 14, average value
Elongation at break Minimum elongation at break along: 130 %
Minimum elongation at break across: 150 % 		EN ISO 527, average value
Tensile strength Minimum tensile strength along: 19 MPa
Minimum tensile strength across: 19 MPa 		EN ISO 527, average value
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 90 °C 		adhered on acrylic glass | Short-term load

Adhesive properties

Adhesive power 18 N/25 mm after 24h on glass | Average value, FINAT TM 1
16 N/25 mm after 24h on acrylic glass | Average value, FINAT TM 1
Adhesive Permanent
Processing
Recommended printing procedure Inkjet printing with solvent-based inks, Inkjet printing with UV inks
Application temperature Minimum temperature 8 °C
Product Construction
Liner Liner: PE-coated paper on both sides, siliconised on one side
Surface weight: 143 g/m²
Front material Special PVC film
Adhesive Solvent-polyacrylate

General

Thickness 0.08 mm without protective liner and adhesive, average force
Dimensions
Format Roll
Standard width 1370 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Back to top