The double-sided adhesive tape consists of a water-dispersible tissue paper that is coated on both sides with a modified, water-soluble acrylate adhesive. The adhesive is characterised by very good initial adhesion and a very good thermal resistance. The used adhesive RA4 complies with the Code of Federal Regulations, Food and Drugs (FDA), 21 CFR Ch. I, § 175.105.
| Shelf Life | 1 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
|---|---|---|
| Temperature resistance | Maximum temperature 200 °C | central European normal climate | short-term up to 230 °C |
| Maximum temperature 230 °C | Average value, S.A.F.T. Test |
| Adhesive power | 10 N/25 mm | on copy paper, after 1 min | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film |
|---|---|---|
| 11 N/25 mm | on copy paper, after 20 min | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film | |
| Initial adhesion (loop tack) | 14 N/25 mm | Average value, FINAT TM 9 |
| Maximum shear strength | 1.5 Hour(s) | at 230 °C | S.A.F.T. Test from 23 °C to 230 °C |
| Repulpability | Repulpable | to TAPPI UM 213 |
|---|
| Adhesive covered side | Water-soluble modified acrylate | |
|---|---|---|
| Adhesive open side | Water-soluble modified acrylate | |
| Carrier |
Colour carrier: Translucent Carrier: Silk paper |
| Format | Roll, Cut | |
|---|---|---|
| Cutting roll width | 19 mm | |
| 25 mm | ||
| 30 mm | ||
| 38 mm | ||
| 50 mm | ||
| 60 mm | ||
| 75 mm | ||
| Standard length | 50 m |
PDF, 35.36kB, 1 Page
PDF, 39.04kB, 2 Pages
PDF, 88.60kB, 1 Page
PDF, 163.28kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.
PDF, 1.59MB, 12 Pages
