Career
Contact

ORABOND® 3331TG

ORABOND® 3331TG is part of our product range of double-sided high-performance adhesive tapes with AM2 adhesive. The adhesive tape consists of a hard PVC film carrier, which is coated on both sides with an acrylate adhesive that has good resistance against UV radiation, temperature stress, chemicals and solvents as well as moisture. The high-shear-resistant adhesive is characterised by excellent permanent adhesion to metal, paint and high-energy plastic surfaces as well as good permanent adhesion to low-energy surfaces. Also suitable for rough or structured surfaces because of high mass application. The used adhesive complies with the Code of Federal Regulations, Food and Drugs (FDA), 21 CFR Ch. I(Issue 01 April 2008), § 175.105.

Product information

Technical properties

Resistance

Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Resistance to solvents and chemicals Mineral oils, Greases, Plastics, Aliphatic solvents, Weak acids, Salts and alkalis with professional bonding | resistant against most
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 70 °C 		central European normal climate

Adhesive properties

Adhesive power 30 N/25 mm after 1 min, on stainless steel | Average value, FINAT TM 1, covered on one side with 50 µm polyester film
35 N/25 mm after 20 min, on stainless steel | Average value, FINAT TM 1, covered on one side with 50 µm polyester film
37 N/25 mm after 24 h, on stainless steel | Average value, FINAT TM 1, covered on one side with 50 µm polyester film
Initial adhesion (loop tack) 22 N/25 mm Average value, FINAT TM 9
Maximum shear strength 400 Hour(s) on stainless steel | Average value, FINAT TM 8, covered on one side with 50 µm polyester film
6 Hour(s) on stainless steel | Average value, FINAT TM 8, covered on one side with 50 µm polyester film
Processing
Application temperature Minimum temperature 15 °C
Product Construction
Adhesive covered side Modified acrylate
Adhesive open side Modified acrylate
Carrier Colour carrier: White
Carrier: Hard PVC film
Dimensions
Format Roll, Cut
Cutting roll width 12 mm
19 mm
25 mm
38 mm
50 mm
100 mm
Standard width 1000 mm
1372 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Back to top