Technical data sheet - English (EN)
PDF, 156.30kB, 3 Pages
ORALITE® 5921M
RA Prismatic Fleet Marking Grade
ORALITE® reflective films series 5921M RA Prismatic Fleet Marking Grade (RapidAir) are highly flexible, weatherproof, self-adhesive, retroreflective films with excellent corrosion and solvent resistance. The ORALITE® 5921M RA series is particularly suitable for the use as vehicle warning markings and can be removed from painted surfaces under the influence of heat. The films are foreseen for the medium-term outdoor use. The material is available with the imprint required for vehicle warning markings in accordance with ECE regulation 104 both as an application pack and in the form of rolls. The film can also be used for the manufacturing of warning marking signs according to ECE regulation 70. The reflector system consists of mirrored microprisms, which achieve high reflective values thanks to their special design. When cutting the product no open cells occur. Edge sealing is therefore not required. The reflective film is printed in a manufacturer-specific pattern as in Figure 1, which also allows for the identification of the running direction. The relevant national provision have to be considered during the adhesion of the product. The product fulfils the regulation EU 2015/208.
Available colours
1 Colors
010
White / Red
Product information
Technical properties
Resistance
| Resistance to cleaning agents | No change | adhered on aluminium | 8 h in detergent solution (0.5 % household cleaner) at room temperature and 65 °C |
|---|---|---|
| Durability | 5 Year(s) | unprinted, with professional processing, with vertical outdoor weathering, central European normal climate |
| Shelf Life | 1 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
| Temperature resistance |
Minimum temperature: -40 °C Maximum temperature: 82 °C |
adhered on aluminium |
Adhesive properties
| Removability | Removable | under of the influence of heat |
|---|---|---|
| Adhesive power | 15 N/25 mm | after 24 h, on stainless steel | Average value, FINAT TM 1 |
| Repositionability | Repositionable | Excellent initial repositionability in dry application process |
Processing
| RapidAir technology | Yes |
|---|---|
| Application temperature | Minimum temperature 15 °C |
| Proposed application technology | Dry application |
Product Construction
General
| Thickness | 0.34 mm | Average value, without protective paper |
|---|
| Front material | Polymer PVC film |
|---|
Reflective Characteristics
| Reflective Technology | Prismatic |
|---|---|
| Reflectivity Compliance | Reflective film structure: Design C |
| Reflectivity classes: RA2 |
Dimensions
| Format | Roll |
|---|---|
| Standard width | 600 mm |
| 1200 mm | |
| Standard length | 50 m |
Downloads
Technical documents
Processing notes - English (EN)
PDF, 215.22kB, 7 Pages
Product information - English (EN)
PDF, 141.38kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
