Career
Contact

ORAJET® 3952F
Digital Printing Film

Optically transparent, glossy, cast PVC high performance film.

Product information

Technical properties

Resistance

Durability Durability (general note):product.properties.technical_attributes.durability.lifetime_value_group.lifetime_value_condition_all.id.608
7 Year(s) with vertical outdoor weathering, central European normal climate; unprinted
Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Maximum shrinkage Maximum shrinkage along 0.1 mm
Maximum shrinkage across 0.1 mm
Bonded to steel | FINAT TM 14th average value
Elongation at break Minimum elongation at break along 120 %
Minimum elongation at break across 120 %
EN ISO 527, average value
Tensile strength Minimum tensile strength along: 19 N/mm²
Minimum tensile strength across: 19 N/mm²
EN ISO 527, average value
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 60 °C
Bonded to aluminum, short-term load

Adhesive properties

Adhesive power 12 N/25 mm after 24 h, on stainless steel | FINAT TM 1, average value
Adhesive Semi permanent
Processing
Recommended printing procedure Inkjet printing with solvent-based inks, Inkjet printing with UV inks, Inkjet printing with latex inks Recommended laminate ORAGUARD® 252F (the transparency is reduced through the lamination)
Application temperature Minimum temperature 10 °C
Product Construction
Liner Polyester film, siliconised on one side

General

Thickness 0.05 mm without protective liner and adhesive, average value
Dimensions
Format Roll
Standard width 1370 mm
1520 mm
Standard length 50 m

Downloads

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Recommended products

Area

Recommended Products

ORAGUARD® 252F

Highly transparent, glossy, cast PVC high performance film with a highly effective UV protection.