ORAJET^® 3930
Photoluminescent

Three-layer, light yellow, cadmium-free premium cast PVC film with glossy surface. Fulfils the requirements of DIN 67510. The afterglow effect is characterised by a particularly high initial brightness, immediately after switching off the stimulating light source. The excitation can be carried out as often as required without reducing the luminous properties of the film. Does not contain radioactive materials.

Product information

Technical properties

Resistance

Durability	Durability :with vertical outdoor exposure, normal Central European climate
	5 Year(s)	with vertical outdoor weathering, central European normal climate; unprinted
Shelf Life	2 Year(s)	in original packaging, at 20 °C and 50% relative humidity
Maximum shrinkage	Maximum shrinkage along 0.2 mm Maximum shrinkage across 0.2 mm	Bonded to steel \| FINAT TM 14
Elongation at break	Minimum elongation at break along 100 % Minimum elongation at break across 100 %	DIN EN ISO 527
Tensile strength	Minimum tensile strength along: 12 N/mm² Minimum tensile strength across: 10 N/mm²	DIN EN ISO 527
Temperature resistance	Minimum temperature: -40 °C Maximum temperature: 60 °C	Short-term exposure up to 80 °C

Adhesive properties

Adhesive power	18 N/25 mm	after 72 h, on stainless steel \| FINAT TM 1, average value
Adhesive	Permanent

Processing

Recommended printing procedure	Inkjet printing with solvent-based inks, Inkjet printing with UV inks, Inkjet printing with latex inks
Application temperature	Minimum temperature 10 °C

Product Construction