Career
Contact

ORAJET® 3676
Window Graphics Film

Perforated white, glossy special PVC film with black rear for the use on level, transparent substrates and glass. Printing the film front results in a visible print image, whereby the perforated black rear is translucent. The share of printable areas on the overall area amounts to 60%. The small hole diameter of 1.5 mm enables a comparatively fine print image.

Product information

Technical properties

Resistance

Durability Durability :with vertical outdoor exposure, normal Central European climate
4 Year(s) Applies for vertical outdoor weathering, central European normal climate; unprinted
Shelf Life 2 Year(s) in original packaging, at 20 °C and 50% relative humidity
Maximum shrinkage Maximum shrinkage along 0.4 mm
Maximum shrinkage across 0 mm 		adhered on glass | Average value, FINAT TM 14
Elongation at break Minimum elongation at break along 50 %
Minimum elongation at break across 50 % 		DIN EN ISO 527, average value
Tensile strength Minimum tensile strength along: 5 N/mm²
Minimum tensile strength across: 5 N/mm² 		DIN EN ISO 527
Seawater resistance no change after 100h/35°C | adhered to aluminum, DIN EN ISO 9227
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 60 °C 		Short-term exposure up to 80 °C

Adhesive properties

Adhesive power 12 N/25 mm after 24 h, glass | FINAT TM 1, average value
Adhesive Permanent
Processing
Recommended printing procedure Inkjet printing with solvent-based inks
Application temperature Minimum temperature 10 °C
Product Construction
Liner Liner: Non-perforated kraft paper siliconised on one side
Surface weight: 137 g/m²
Front material Thickness front material: 0.14 mm
Front material: Special PVC film

General

Thickness 0.14 mm without protective liner and adhesive, average value
Dimensions
Format Roll
Standard width 1370 mm
1520 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2026-02-04.

Back to top