ORAJET^® 3352F
Optical Clear Film

Ultra clear, surface coated, glossy PET film with excellent form stability.

Product information

Technical properties

Durability	1 Year(s)	with vertical outdoor weathering, central European normal climate; unprinted
Shelf Life	2 Year(s)	in original packaging, at 20 °C and 50 % relative humidity
Maximum shrinkage	Maximum shrinkage along: 0.1 mm Maximum shrinkage across : 0.1 mm	Bonded to steel \| FINAT TM 14
Elongation at break	Minimum elongation at break along: 110 % Minimum elongation at break across: 50 %	DIN EN ISO 527
Tensile strength	Minimum tensile strength along: 70 MPa Minimum tensile strength across: 130 MPa	EN ISO 527
Temperature resistance	Minimum temperature: -30 °C Maximum temperature: 70 °C	adhered on aluminium, central European normal climate

Adhesive power	2 N/25 mm	after 24 h, on stainless steel \| FINAT TM 1, average value
Adhesive	Removable

Processing

Recommended printing procedure	Inkjet printing with solvent-based inks, Inkjet printing with UV inks, Inkjet printing with latex inks	Remark: A maximum temperature of 100 °C may not be exceeded when printing with latex inks.
Application temperature	Minimum temperature 10 °C

Product Construction

Liner	Polyester film, siliconised on one side
Adhesive	Solvent-polyacrylate

Thickness	0.07 mm	without protective liner and adhesive, average value

Dimensions

PDF, 171.33kB, 2 Pages

PDF, 57.51kB, 2 Pages

PDF, 140.35kB, 1 Page

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.