Technical data sheet - English (EN)
PDF, 139.33kB, 1 Page
ORAJET® 3552F
Digital Printing Film
The highly transparent, glossy special PVC film is ideal for sophisticated advertising campaigns and glass decorations. It is specially designed for color-intensive digital printing on transparent substrates and can be used both indoors and outdoors. The film can be applied wet, is highly transparent, and can be used in large formats. It impresses with its high adhesion, long-lasting color brilliance, and excellent transparency. Ideal for indoor advertising, labels and stickers, outdoor advertising, vehicle lettering, shop window decorations, and glass decorations.
- Crystal-clear transparency for brilliant colors and maximum visibility
- Large-format motifs can be applied seamlessly and easily
Product information
Technical properties
Resistance
| Durability | Durability (general note):For vertical outdoor weathering, normal Central European climate | |
|---|---|---|
| 5 | unprinted | |
| Shelf Life | 2 Year(s) | in original packaging, at 20°C and 50% relative humidity |
| Maximum shrinkage |
Maximum shrinkage along 0.1 mm
Maximum shrinkage across 0.1 mm |
Glued to steel | Average value, FINAT TM 14 Glued to steel | Average value, FINAT TM 14 |
| Elongation at break |
Minimum elongation at break along 110 %
Minimum elongation at break across 110 % |
Average value, DIN EN ISO 527 Average value, DIN EN ISO 527 |
| Tensile strength |
Minimum tensile strength along: 15 MPa Minimum tensile strength across: 15 MPa |
Average value, DIN EN ISO 527 |
| Temperature resistance |
Minimum temperature: -30 °C Maximum temperature: 70 °C |
short-term load, bonded to aluminum | no change |
Adhesive properties
| Adhesive power | 12 N/25 mm | after 24 hours, stainless steel | Average value, FINAT TM 1 |
|---|---|---|
| Adhesive | Semi permanent |
Processing
| Recommended printing procedure | Inkjet printing with solvent-based inks, Inkjet printing with latex inks, Inkjet printing with UV inks |
|---|---|
| Application temperature | Minimum temperature 8 °C |
Product Construction
| Liner | Polyester film, siliconised on one side |
|---|---|
| Adhesive | Solvent-polyacrylate |
General
| Thickness | 0.045 mm | Average value, without protective paper and adhesive |
|---|
Dimensions
| Format | Roll |
|---|---|
| Standard width | 1220 mm |
| 1370 mm | |
| 1520 mm | |
| Standard length | 50 m |
Downloads
Technical documents
Product information - English (EN)
PDF, 627.09kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.
Recommended products
Recommended Products
ORAGUARD® 212F
The optically highly transparent, glossy special PVC film was developed as a suitable laminate for the 3552F digital printing series and, in combination, offers reliable UV protection. It is...