Career
Contact

ORAGUARD® 289F

Premium high-performance laminate film made of polyurethane, transparent and glossy, with highly effective UV protection and self-healing surface. This means smaller, superficial scratches (e.g. of squeegees, cleaning brushes) can be reliably removed through the exposure to heat (solar radiation, hot air dryer, etc.).

Product information

Technical properties

Resistance

Durability 10 Year(s) with vertical outdoor weathering, central European normal climate
Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Resistance to solvents and chemicals Oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis at room temperature, 72 h after adhesion on aluminium, stable short-term
Maximum shrinkage Unsupported type | Unsupported type
Elongation at break Minimum elongation at break along: 150 %
Minimum elongation at break across: 150 % 		DIN EN ISO 527
Tensile strength Minimum tensile strength along: 25 MPa
Minimum tensile strength across: 25 MPa 		EN ISO 527
Temperature resistance Minimum temperature: -50 °C
Maximum temperature: 100 °C 		adhered on aluminium, central European normal climate

Adhesive properties

Adhesive power 12 N/25 mm after 24 h, stainless steel | FINAT TM 1, average value
Adhesive Permanent
Processing
Application temperature Minimum temperature 8 °C
Product Construction
Liner Polyester film, siliconised on one side
Adhesive Solvent-polyacrylate

General

Thickness 0.05 mm without protective liner and adhesive, average value
Dimensions
Format Roll
Standard width 1370 mm
1520 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Back to top