Technical data sheet - English (EN)
PDF, 87.28kB, 1 Page
ORAFIX® 1299
The one-sided adhesive tape consists of a very elastic, one-sided siliconised special paper with high tear resistance, which is coated with a modified, water-soluble acrylate adhesive. The adhesive is characterised by very good initial adhesion and a very good thermal resistance. The used adhesive RA2 complies with the Code of Federal Regulations, Food and Drugs (FDA), 21 CFR Ch. I, § 175.105.
Product information
Technical properties
Resistance
| Temperature resistance | Maximum temperature 200 °C | short-term up to 230 °C |
|---|
Adhesive properties
| Adhesive power | 8 N/25 mm | on stainless steel, after 1 min | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film |
|---|---|---|
| 10 N/25 mm | on stainless steel, after 20 min | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film | |
| Maximum shear strength | 1.5 Hour(s) | at 230 °C | S.A.F.T. Test from 23 °C to 230 °C |
Processing
| Repulpability | Repulpable |
|---|
Product Construction
| Liner | Without cover material | |
|---|---|---|
| Adhesive open side | Water-soluble modified acrylate | |
| Carrier |
Colour carrier: White Carrier: Special paper |
Dimensions
| Format | Roll, Cut | |
|---|---|---|
| Cutting roll width | 19 mm | |
| 25 mm | ||
| 30 mm | ||
| 38 mm | ||
| 50 mm | ||
| 60 mm | ||
| 75 mm | ||
| Standard length | 50 m |
Downloads
Technical documents
Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.