Career
Contact

ORACAL® 951
Premium Cast

Moulded premium PVC film for plotter applications with optimum cutting and processing properties. Specifically developed for labelling, markings and decorations. Suitable in particular for high-quality advertising on vehicles and means of transport. Also applicable on uneven and curved substrates as well as in beads and over rivets. Surface high-gloss, in addition matt white and matt black. The high-gloss surface finish is suitable for digital thermal transfer printing (with resin ribbons).

Product information

Technical properties

Resistance

Resistance to cleaning agents No change adhered on aluminium, 0.5 % household detergent, at room temperature and 65 °C | 0.5 % household cleaning agent, at room temperature and 65 °C
Durability Durability :with vertical outdoor exposure, normal Central European climate
10 Year(s) Black, white
8 Year(s) Transparent, coloured
6 Year(s) metallic
3 Year(s) Copper, gold metallic, bronze, lead gold, pyrite, red gold L, leaf green metallic, steppe green metallic
Shelf Life 2 Year(s) in original packaging, at 20 °C and 50% relative humidity
Resistance to solvents and chemicals Greases, Fuels, Weak acids, Salts and alkalis, Isopropyl alcohol, Washing suds (0.5 % household cleaner) At room temperature
Maximum shrinkage Maximum shrinkage along 0.1 mm
Maximum shrinkage across 0.1 mm 		bonded to steel | FINAT TM 14
Elongation at break Minimum elongation at break along 150 %
Minimum elongation at break across 150 % 		DIN EN ISO 527
DIN EN ISO 527
Tensile strength Minimum tensile strength along: 21 N/mm²
Minimum tensile strength across: 21 N/mm² 		EN ISO 527
Seawater resistance no change after 100h/35°C | adhered to aluminum, DIN EN ISO 9227
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 60 °C 		Short-term load, bonded to aluminum
Water resistance Tested adhered on aluminium, at 23 °C

Adhesive properties

Adhesive power 18 N/25 mm after 24 h, on stainless steel | FINAT TM 1
Adhesive Permanent
Processing
Recommended printing procedure Digital thermal transfer printing the high-gloss surface finish is suitable for digital thermal transfer printing (with resin ribbons)
Application temperature Minimum temperature 10 °C
Product Construction

General

Thickness 0.05 mm Average value, without protective liner and adhesive
Dimensions
Format Roll
Standard width 1000 mm
1260 mm
Standard length 50 m
25 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2026-02-04.

Back to top