Technical data sheet - English (EN)
PDF, 39.45kB, 2 Pages
Moulded, matt-white diffuser film with 30 % light transmission. The film improves the light distribution and allows for even illumination of illuminated signs and illuminated advertising. The reduced surface gloss prevents unwanted reflections.
Resistance to cleaning agents | No change | adhered on acrylic glass, 8 h in mild detergent solution (0.5 % household detergent) at room temperature and 65 °C |
---|---|---|
Durability | Durability (general note):The durability of the film depends to a large extent on the climatic conditions and the effect of light. | |
10 Year(s) | with vertical outdoor weathering, central European normal climate | |
Shelf Life | 2 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
Tensile strength |
Minimum tensile strength along: 21 MPa Minimum tensile strength across: 21 MPa |
EN ISO 527 |
Adhesive power | 18 N/25 mm | adhered on glass, after 24 h | Average value, FINAT TM 1 |
---|---|---|
16 N/25 mm | adhered on acrylic glass, after 24 h | Average value, FINAT TM 1 | |
Adhesive | Permanent |
Application temperature | Minimum temperature 8 °C |
---|
Liner | Silicone cardboard coated on one side |
---|---|
Adhesive | Solvent-polyacrylate |
Thickness | 0.055 mm | Average value, without protective paper and adhesive |
---|
Format | Roll |
---|---|
Standard width | 1260 mm |
Standard length | 50 m |
25 m |
PDF, 39.45kB, 2 Pages
PDF, 107.18kB, 3 Pages
PDF, 89.39kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.