Technical data sheet - English (EN)
PDF, 85.87kB, 1 Page
The double-sided adhesive tape consists of a white closed-cell polyethylene foam that is coated on the both sides with a rubber adhesive. The adhesive is characterised by amongst other things good adhesion on apolar substrates.
Shelf Life | 1 Year(s) | in original packaging, at 20 °C and 50 % relative humidity |
---|---|---|
Temperature resistance |
Minimum temperature: -30 °C Maximum temperature: 70 °C |
central European normal climate |
Adhesive power | 18 N/25 mm | after 1 min, FINAT TM 1, on stainless steel, covered on one side with 0.05 mm polyester film | Foam tear |
---|---|---|
18 N/25 mm | after 20 min, FINAT TM 1, on stainless steel, covered on one side with 0.05 mm polyester film | Foam tear | |
18 N/25 mm | after 24 h, FINAT TM 1, on stainless steel, covered on one side with 0.05 mm polyester film | |
Initial adhesion (loop tack) | 37 N/25 mm | FINAT TM 9 | Average value |
Maximum shear strength | 50 Hour(s) | Average value, at 23 °C, FINAT TM 8, on stainless steel, covered on one side with 0.05 mm polyester film |
0.16 Hour(s) | Average value, at 70 °C, FINAT TM 8, on stainless steel, covered on one side with 0.05 mm polyester film |
Application temperature | Minimum temperature 15 °C |
---|
Adhesive covered side | Polyacrylate | |
---|---|---|
Adhesive open side | Polyacrylate | |
Carrier |
Colour carrier: White Carrier: Closed-cell polyethylene foam |
Format | Roll |
---|---|
Standard width | 1250 mm |
Standard length | 50 m |
PDF, 85.87kB, 1 Page
PDF, 39.04kB, 2 Pages
PDF, 88.60kB, 1 Page
PDF, 163.28kB, 1 Page
Our safety data sheets / product information consider the state of the SVHC list of 2025-01-21.
PDF, 1.50MB, 8 Pages