Career
Contact

ORABOND® 1375
Transfer Tape

The transfer adhesive tape consists of a highly transparent pure acrylate adhesive, that has an excellent resistance against UV radiation, temperature stress, chemicals and solvents as well as moisture. The high-shear-resistant transfer adhesive has an excellent permanent adhesion on metal, painted and highly energetic plastic surfaces. The transfer tape is certified in accordance with UL 969.

Product information

Technical properties

Resistance

Shelf Life 2 Year(s) in original packaging, at 20 °C and 50 % relative humidity
Resistance to solvents and chemicals Mineral oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis with professional bonding | resistant against most
UV resistance Highly recommended
Water resistance Highly recommended
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 170 °C 		1 h, central European normal climate | short-term up to 200 °C

Adhesive properties

Adhesive power 15 N/25 mm after 1 min, on stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film
18 N/25 mm after 20 min, on stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film
20 N/25 mm after 24 h, on stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film
Maximum shear strength 1000 Hour(s) at 23 °C, on stainless steel | Average value, FINAT TM 8, covered on one side with 50 µm polyester film
72 Hour(s) at 70 °C, on stainless steel | Average value, FINAT TM 8, covered on one side with 50 µm polyester film
Processing
Application temperature Minimum temperature 18 °C
Product Construction
Adhesive open side Pure acrylate
Dimensions
Format Roll, Cut
Standard width 305 mm
610 mm
1220 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Back to top