Career
Contact

ORABOND® 11391

The double-sided adhesive tape consists of a polyester film carrier that is coated on both sides with a modified solvent acrylate adhesive which shows a very good resistance against UV radiation, temperature stress, chemicals and solvents as well as moisture. The high-shear-resistant adhesive is characterised by excellent permanent adhesion to metal, paint and high-energy plastic surfaces as well as good permanent adhesion to low-energy surfaces.

Product information

Technical properties

Resistance

Shelf Life 2 Year(s)
Resistance to solvents and chemicals Mineral oils, Greases, Fuels, Aliphatic solvents, Weak acids, Salts and alkalis
UV resistance Recommended
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 160 °C 		1 h, central European normal climate | short-term up to 180 °C

Adhesive properties

Adhesive power 22 N/25 mm after 1 min, stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film
25 N/25 mm after 20 min, stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film
28 N/25 mm after 24 h, on stainless steel | Average value, FINAT TM 1, covered on one side with 0.05 mm polyester film
Initial adhesion (loop tack) 26 N/25 mm
Maximum shear strength 400 Hour(s) at 23 °C, stainless steel | FINAT TM 8, covered on one side with 0.05 mm polyester film
6 Hour(s) at 70 °C, stainless steel
Processing
Application temperature Minimum temperature 15 °C
Product Construction
Liner PP film silicone-coated on both sides
Adhesive covered side Modified solvent polyacrylate
Adhesive open side Natural rubber
Carrier Polyester
Dimensions
Format Roll, Cut
Cutting roll width 12 mm
15 mm
19 mm
25 mm
30 mm
38 mm
50 mm
60 mm
75 mm
100 mm
Standard width 1000 mm
Standard length 50 m

Downloads

Area

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2025-05-25.

Back to top