Career
Contact

ORAGUARD® Vantage Pro
Paint Protection Film 2715C

ORAGUARD® Vantage Pro is a premium Paint Protection Film (PPF) for professional automotive applications. Based on thermoplastic polyurethane (TPU), the paint protection film has been developed to combine high mechanical resistance, controlled processability and a consistently high-quality surface appearance.

The film offers high elasticity and can be applied in a controlled manner over complex vehicle contours. Good repositionability supports precise alignment during installation. The surface properties have been specifically developed to facilitate squeegeeing and enable efficient processing. The adhesive formulation, in combination with a suitable application fluid, reduces the formation of lift lines.

ORAGUARD® Vantage Pro is designed for precise plotting with computer-aided cutting systems. Plotter lines are clearly visible through the transparent cap sheet. The cap sheet protects the film surface from dust and mechanical influences during transport, storage, plotting and installation, thereby reducing the risk of surface contamination.

The surface features a self-healing top coating and offers very high resistance to dirt, chemicals and environmental influences. At the same time, the film provides a high level of stone-chip protection. The Transparent Gloss and Transparent Matte surface variants meet different optical requirements. In addition, ORAGUARD® Vantage Pro is available in selected ORAFOL colors.

ORAGUARD® Vantage Pro is designed for a durability of up to seven years. The products meet defined requirements of the automotive industry, including VW TL 52428, Daimler DBL 7379 and FORD WSS-M99J291-B2.

Development and manufacturing are carried out within the ORAFOL Group. This enables material development, film production, coating and other key process steps to be controlled within our own value chain.

 

Available product variants:

ORAGUARD Vantage Pro PPF2715GCF+ gloss with green cap sheet (standard)
ORAGUARD Vantage Pro PPF2715GF+ gloss without cap sheet (optional)
ORAGUARD Vantage Pro PPF2715MF+ matte (standard)

  • Flexible green cap sheet – surface protection during shipping and clear visibility of cuts after plotting; reduced dust and dirt contamination
  • Plotter-optimized processing also for variants without cap sheet (matte), precise cutting and low surface friction during squeegeeing
  • High elasticity and repositionability – controlled application even over complex contours According to SAE J400, 2.4 L gravel
  • Self-healing top coating – high resistance to scratching, dirt and chemicals while maintaining a high-quality surface appearance over time
  • ORAFOL value chain – development and manufacturing within the ORAFOL Group; durability of up to 10 years

Product information

Technical properties

Resistance

Durability 7 Year(s)
Shelf Life 2 Year(s) in original packaging, at 20 °C and 50% relative humidity
Resistance to solvents and chemicals Water, Sulphuric acid (10 %), Hydrochloric acid (10 %), Bird droppings (pancreatin), Tree resin, Fuels, Motor oil, Isopropyl alcohol Immersion for: 1 hour (water, acid), 30 min (pancreatin, tree resin), 10 min (isopropanol, fuel, engine oil), evaluation after 24 hours at room temperature
Maximum shrinkage Maximum shrinkage along 0.2 mm
Maximum shrinkage across 0.2 mm
adhered to aluminium | FINAT TM 14,average value
Elongation at break Minimum elongation at break along 300 %
Minimum elongation at break across 300 %
DIN EN ISO 527
Tensile strength Minimum tensile strength along: 29 N/mm²
Minimum tensile strength across: 29 N/mm²
DIN EN ISO 527
Stone chip resistance Passed According to SAE J400, 2.4 L gravel
Temperature resistance Minimum temperature: -40 °C
Maximum temperature: 100 °C

Adhesive properties

Adhesive power 17 N/25 mm after 24 h, stainless steel | FINAT TM 1, average value
Adhesive Permanent
Processing
Application temperature Minimum temperature 10 °C
Proposed application technology Wet application
Product Construction
Liner PET film, single-side silicone coated
Front material Thickness front material: 0.16 mm
Front material: Polyurethane film
Top Coat 0.011 mm

General

Thickness 0.16 mm Without release liner and adhesive, average value
Dimensions
Format Roll
Standard width 200 mm Available in 15 m length, specifically for loading sill protection
10 mm Available in 15 m length, specifically for loading sill protection
1520 mm
1830 mm
Standard length 50 m Currently unavailable
15 m

Downloads

Technical documents

 

Our safety data sheets / product information consider the state of the SVHC list of 2026-02-04.