Graphic Innovations
Digital Printing Materials
Engineered to Achieve Perfection™
ORAFOL Europe GmbH Headquarters and production facility
ORAFOL is one of the world’s leading manufacturers of innovative self-adhesive graphic films, reflective materials and adhesive tape systems. The international ORAFOL Group is headquartered just outside the city gates of Berlin, in Oranienburg. ORAFOL’s Worldwide Locations
2
Digital Printing Materials ORAFOL offers a vast range of high performance materials for digital printing applications. Explore the range and unleash your creativity. Made in Germany.
4-11
Films for solvent-based inkjet printing
12-13 Films for thermotransfer printing 12-13 Materials for water-based inkjet printing 14-15 Laminating Films 16-17 Mounting Films 19
Notes on Processing and Handling
3
Digital Printing Materials / Product Overview
Films for solvent based inkjet printing Description Product
Front Material
Colours / surfaces Gloss (G) Matt (M) Semi-gloss (SG)
Adhesive
Release Liner
Areas of use
ORAJET® 3981RA+ ProSlide
High performance Premium Polyurethane film, 50 micron
White (G)
Solvent polyacrylate, repositionable with permanent final adhesion, grey
Double sided PE coated RapidAir ® ProSlide paper, one side siliconised, 158 g/m²
For long-term PVC- and plasticizer-free graphic applications with the highest degree of brilliancy and durability, e.g. complete car wrapping. The RapidAir ® technology enables easy and rapid application without air inclusion.
ORAJET® 3951RA+ ProSlide
Premium Cast PVC film, 55 micron
White (G)
Solvent polyacrylate, repositionable with permanent final adhesion, grey
Double sided PE coated RapidAir ® ProSlide paper, one side siliconised, 158 g/m²
For long-term outdoor graphic applications with the highest degree of brilliancy and durability e.g. for complete car wrapping. The RapidAir ® technology enables easy and rapid application without air inclusion.
ORAJET® 3951
Premium Cast PVC film, 55 micron
White (G)
Solvent polyacrylate, repositionable with permanent final adhesion, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For long-term graphic applications with the highest degree of brilliancy and durability in outdoor applications, e.g. complete car wrapping.
Double sided PE coated paper, one side siliconised, 143 g/m²
For long-term graphic applications, markings and decorations with the highest degree of brilliancy and durability in extreme outdoor conditions and on “hard-to-stick” substrates.
ORAJET® 3951HT
Premium Cast PVC film, 55 micron
White (G)
Solvent polyacrylate, permanent, with high initial tack and high final adhesion, grey
Transparent (G) Solvent polyacrylate, permanent, with high initial tack and high final adhesion ORAJET® 3954 Brick Stone Film
Premium Cast PVC film, 55 micron
White (G)
Solvent polyacrylate, permanent, grey
Double sided PE coated For brilliant and colourful outdoor advertising on flat or simple paper, one side curved unsealed textured surfaces, e.g. on brick, concrete block siliconised, and poured concrete. Easily removable by slight heating. 143 g/m²
ORAJET® 3961RA
Premium Cast PVC film, 55 micron
White (G)
Solvent polyacrylate, permanent, with high aggressive initial tack and high final adhesion, grey
Double sided PE coated RapidAir ® paper, one side siliconised, 143 g/m²
For special decorations on challenging surfaces (uneven, porous, or textured, e.g. hammer finish varnish) of caravans and trailers. Especially recommended for applications on low energy plastics (polyethylene, polypropylene), that require high resistance long-term. Ideal adjustment on surface structure. The RapidAir ® technology enables easy and quick application, without air inclusion.
ORAJET® 3961
Premium Cast PVC film, 55 micron
White (G)
Solvent polyacrylate, permanent, with high aggressive initial tack and high final adhesion, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For special decorations on challenging surfaces (uneven, porous, or textured, e.g. hammer finish varnish) of caravans and trailers. Especially recommended for applications on low energy plastics (polyethylene, polypropylene), that require high resistance long-term. Ideal adjustment on surface structure.
ORAJET® 3959
Premium Cast PVC film, 55 micron
White (G)
Solvent polyacrylate, repositionable with permanent final adhesion, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
In combination with the gasoline resistant laminating film ORAGUARD ® 259 suited for long-term graphic applications and promotions on petrol stations, gas tanks, on tankers or trucks.
ORAJET® 3952F
Premium Cast PVC film, 50 micron
Optical clear (G)
Solvent polyacrylate, semi permanent
Silicone coated polyester film, 75 µm
For ultra clear and colour intensive printed glass decorations both indoor and outdoor.
ORAJET® 3967AC
Perforated Premium Cast PVC film, 65 micron
White (G)
Solvent polyacrylate, repositionable with permanent final adhesion, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
Perforated Premium Cast PVC film for short-term exterior graphic applications on aircrafts, such as markings or decorations. Especially recommended in combination with ORAGUARD ® 293AC.
ORAJET® 3930
Premium Cast PVC film, 150 micron
Light yellow (G)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
For indoor and outdoor marking of emergency exits and danger spots. For outdoor marking recommended in combination with ORAGUARD ® 293.
ORAJET® 3751
Polymeric PVC film, 60 micron
White (G)
Solvent polyacrylate, repositionable with permanent final adhesion, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For long-term displays with the highest degree of brilliancy and durability in outdoor applications, e,g, vehicle lettering.
Transparent (G) Solvent polyacrylate, repositionable with permanent final adhesion ORAJET® 3551RA
Polymeric PVC film, 70 micron
White (G), (M)
Solvent polyacrylate, repositionable with permanent final adhesion, grey
Double sided PE coated RapidAir ® paper, one side siliconised, 143 g/m²
For long-term displays with the highest degree of brilliancy and durability in outdoor applications, e.g. vehicle lettering. The RapidAir ® technology enables easy and rapid application without air inclusion.
ORAJET® 3551
Polymeric PVC film 70 micron
White (G), (M)
Solvent polyacrylate, repositionable with permanent final adhesion, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For long-term displays with the highest degree of brilliancy and durability in outdoor applications, e.g. vehicle lettering.
Transparent (G), (M)
Solvent polyacrylate, repositionable with permanent final adhesions
Measurement after 24 h Adhered to aluminium, short-term exposure Special sizes available upon request
4
nder vertical outdoor exposure (normal climate of central Europe) U Not available in transparent matt O nly available in white gloss
For information about ICC profiles please see www.orafol.com The films are printable with solvent-based, UV-curable and latex inkjet printers STANDARD SPLICE-FREE
Transparent (G) Solvent polyacrylate, repositionable with permanent final adhesion
Digital Printing Materials / Product Overview
Recommendations
760 1050 1370 1520
50
-50° C to +100° C
10
760 1050 1370 1520
50
1370 1520
50
252F
10
250AS
-50° C to +100° C
255AS
+8° C
50
236
18
1370 1520
200
+8° C
10
210 / 210DU *
14
Lengths (m)
215 / 215DU *
-50° C to +100° C
Widths (mm)
ORAGUARD ® Laminating Films
259
+8° C
Standard sizes of rolls on 3” cores
290 / 290F / 290DU*
12
Service life (unprinted) in years
289F
Minimum Temperature application resistance temperature (no variation)
297GF
Adhesive power (FINAT-TM 1) N/25 mm (average)
293 / 293F
Technical Data
8
28
+4° C
-50° C to +100° C
7
5
30
+10° C
-50° C to +100° C
10***
760 1370 1520
50
20
+4° C
-50° C to +100° C
10
1370 1520
50
30
+4° C
-50° C to +100° C
10
1370 1520
50
18
+8° C
-50° C to +100° C
8
1370 1520
50
12
+10° C
-30° C to +70° C
7
1370 1520
50
18
+10° C
-50° C to +100° C
2
1520
50 only 293AC
18
+8° C
-40° C to +100° C
5
1370
10 25 50
18
+8° C
-50° C to +90° C
8
760 1370 1520
50
16
+8° C
-50° C to +90° C
7
760 1050 1370 1520 1600
50
18
+8° C
-50° C to +90° C
7
760 1050 1370 1520 1600
50
*) For UV prints we offer the special laminating films ORAGUARD ® 210DU, ORAGUARD ® 215DU and ORAGUARD ® 290DU. ***) Experience has shown that when graphics that have been applied to bricks are removed, a difference in colour of the substrate between the covered and uncovered part occurs after approximately one year. This difference results from the fading of the bricks, whereby the covered part is protected from sunlight. For short-term applications it is therefore recommended to remove the film before the end of a year.
5
Digital Printing Materials / Product Overview
Films for solvent based inkjet printing Product
Front Material
Colours / surfaces Gloss (G) Matt (M) Semi-gloss (SG)
Adhesive
Release Liner
Areas of use
ORAJET® 3550
Polymeric PVC film, 70 micron
White (G)
Solvent polyacrylate, repositionable with permanent final adhesion
Double sided PE coated paper, one side siliconised, 143 g/m²
For long-term displays with highest degree of brilliancy and durability in outdoor applications, e.g. vehicle lettering.
ORAJET® 3591RA
Polymeric PVC film, 70 micron
White (G)
Solvent polyacrylate, removable, grey
Double sided PE coated RapidAir ® paper, one side siliconised, 143 g/m²
For long-term displays with the highest degree of brilliancy and durability in outdoor applications, e.g. vehicle lettering. The RapidAir ® technology enables easy and rapid application without air inclusion.
ORAJET® 3591
Polymeric PVC film, 70 micron
White (G)
Solvent polyacrylate, removable, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For long-term displays with the highest degree of brilliancy and durability in outdoor applications, e.g. vehicle lettering.
ORAJET® 3551DT
Polymeric PVC film, 70 micron
White (G)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
Good processing properties at low temperatures. For long-term displays with the highest degree of brilliancy and durability in outdoor applications, e.g. vehicle lettering.
ORAJET® 3554 Brick Stone Film
Polymeric PVC film, 70 micron
White (M)
Solvent polyacrylate, permanent, grey
Double sided PE coated For brilliant and colourful outdoor advertising on flat or simple paper, one side curved unsealed textured surfaces, e.g. on brick, concrete block siliconised and poured concrete. Easily removable by slight heating. 143 g/m²
ORAJET® 3105
Polymeric PVC film, 100 micron
White (G), (M), (SG)
Solvent polyacrylate permanent, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For brilliant, digital large-format prints and displays in long-term outdoor applications.
ORAJET® 3105HT
High performance PVC film, 100 micron
White (G)
Solvent polyacrylate, permanent, with high initial tack and high final adhesion, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For brilliant, long-term, digital large-format prints and displays in extreme outdoor conditions and on “hard-to-stick” substrates.
ORAJET® 3109
Polymeric PVC film, 100 micron
White (G)
Solvent polyacrylate, removable, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For digital large-format prints and displays in outdoor applications.
ORAJET® 3106SG Caravan Film
Polymeric PVC film, 100 micron
White (SG)
Solvent polyacrylate, permanent, with high initial tack and high final adhesion
Double sided PE coated paper, one side siliconised, 143 g/m²
Designed for applications on “hard-to-stick” surfaces such as low energy plastics (polyethylene, polypropylene) and rough or textured surfaces. Recommended for long-term outdoor graphic applications and markings on caravans and car trailers.
ORAJET® 3850
Translucent Polymeric PVC film, 80 micron
White (SG)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
For illuminated displays for long-term outdoor applications, e.g. application on light boxes.
ORAJET® 3851
Polymeric PVC film, 80 micron
Silvergrey with fine structure (090)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
Digital printing glass decor film, for decorative design of shop windows and glass doors.
ORALITE® 5600
Retroreflective Cast PVC film, 150 micron
11 colours
Solvent polyacrylate, permanent, removable by heat
Double sided PE coated paper, one side siliconised
Developed for high quality vehicle livery, to produce lettering, markings and decorations. Suitable for use on cutting plotters; provides good adaptability also to corrugations and rivets.
ORALITE® 5600E
Retroreflective Cast PVC film, 140 micron
11 colours
Solvent polyacrylate, permanent, removable by heat
Double sided PE coated paper, one side siliconised
Developed for high quality vehicle livery, to produce lettering, markings and decorations, which may be applied within contour markings according to ECE 104. Suitable for use on cutting plotters; provides good adaptability also to corrugations and rivets.
ORALITE® 5650RA
Retroreflective Cast PVC film, 150 micron
11 colours
Solvent polyacrylate, permanent
Double sided PE coated Developed for large-format high quality vehicle livery, to produce RapidAir ® paper, one lettering, markings and decorations. The RapidAir ® technology side siliconised enables easy and rapid application without air inclusion, especially of large-sized graphics or decals. Suitable for even or slightly curved surfaces.
ORALITE® 5400
Retroreflective Special Cast PVC film, 135 micron
6 colours
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised
Developed for the manufacture of guidance and information signs as well as for reflective advertising. For short-term outdoor use. Suitable for digital printing with solvent based inks and for use on cutting plotters. Good adaptability to uneven surfaces.
ORALITE® 5200
Retroreflective Special Cast PVC film, 100 micron
6 colours
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised
For the manufacture of temporary sign boards and reflective advertising.
ORAJET® 3651RA
Blended Polymeric PVC film, 70 micron
White (G)
Solvent polyacrylate, permanent, grey
Double sided PE coated RapidAir ® paper, one side siliconised, 143 g/m²
For brilliant and colourful displays for digital large-format prints in outdoor application. The RapidAir ® technology enables easy and rapid application without air inclusion.
Transparent (G) Solvent polyacrylate removable
Transparent (G) Solvent polyacrylate permanent
Measurement after 24 h Adhered to aluminium, short-term exposure Special sizes available upon request Under vertical outdoor exposure (normal climate of central Europe)
6
dhered to acrylic glass A O nly available in white Only available in gloss and matt Adhered to steel
Only available in gloss O nly available in transparent Front material including adhesive
For information about ICC profiles please see www.orafol.com The films are printable with solvent-based, UV-curable and latex inkjet printers STANDARD SPLICE-FREE
Description
Digital Printing Materials / Product Overview
Recommendations
7
1370 1520
50
8
+8° C
-50° C to +90° C
7
760 1370 1520
50
18
-5° C
-50° C to +90° C
7
760 1370 1520
50
24
+10° C
-50° C to +100° C
7***
1370
50
18
+8° C
-50° C to +90° C
7
760 1370 1520
50
28
+4° C
-50° C to +100° C
5
1370 1520
50
8
+8° C
-50° C to +90° C
7
1370 1520
50
28
+4° C
-50° C to +100° C
7
1370
50
18
+8° C
-40° C to +80° C
7
760 1000 1260 1370
glass: 18 +8° C acrylic glass: 16
-40° C to +90° C
7
1370
17 16
+15° C
-50° C to +95° C
7
610 760 1235
1370 1520
25 50
15 12
+15° C
-50° C to +95° C
7
610 760 920
1235 1370 1520
50
18 14
+15° C
-50° C to +95° C
7
610 760 1235 1370 1520
25 50
15
+10° C
-50° C to +82° C
4
610 1235
50
15
+10° C
-50° C to +82° C
3
610 1235
50
16
+8° C
-40° C to +80° C
5
760 1050 1370 1520
50
1520
252F
-50° C to +90° C
250AS
+8° C
255AS
8
1600
236
760 1370 1520
200
7
210 / 210DU *
-50° C to +90° C
215 / 215DU *
+8° C
Lengths (m)
259
18
Widths (mm)
ORAGUARD ® Laminating Films 290 / 290F / 290DU*
Standard sizes cores
289F
Minimum Temperature application resistance temperature (no variation)
297GF
Service life (unprinted) in years
of rolls on 3”
Adhesive power (FINAT-TM 1) N/25 mm (average)
293 / 293F
Technical Data
50
50
50
*) For UV prints we offer the special laminating films ORAGUARD ® 210DU, ORAGUARD ® 215DU and ORAGUARD ® 290DU. ***) Experience has shown that when graphics that have been applied to bricks are removed, a difference in colour of the substrate between the covered and uncovered part occurs after approximately one year. This difference results from the fading of the bricks, whereby the covered part is protected from sunlight. For short-term applications it is therefore recommended to remove the film before the end of a year.
7
Digital Printing Materials / Product Overview
Films for solvent based inkjet printing Product
Front Material
Colours / surfaces Gloss (G) Matt (M) Semi-gloss (SG)
Adhesive
Release Liner
Areas of use
ORAJET® 3651
Blended Polymeric PVC film, 70 micron
White (G), (M)
Solvent polyacrylate, permanent, grey
For brilliant and colourful displays for digital large-format prints in outdoor applications.
Transparent (G), (M)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
ORAJET® 3650
Blended Polymeric PVC film, 70 micron
White (G), (M)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
For brilliant and colourful displays for digital large-format prints in outdoor applications.
ORAJET® 3691
Blended Polymeric PVC film, 70 micron
White (G), (M)
Solvent polyacrylate, removable, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For brilliant and colourful displays for digital large-format prints in outdoor applications.
ORAJET® 3165RA
Blended Polymeric PVC film, 100 micron
White (G), (M)
Solvent polyacrylate, permanent, grey
Double sided PE coated For brilliant and colourful displays for digital large-format prints RapidAir ® in outdoor application. The RapidAir ® technology enables easy paper, one side and rapid application without air inclusion. siliconised, 143 g/m²
ORAJET® 3165
Blended Polymeric PVC film, 100 micron
White (G), (M)
Solvent polyacrylate, permanent, grey
For brilliant and colourful displays for digital large-format prints in outdoor applications.
Transparent (G), (M)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
Blended Polymeric PVC film, 100 micron
White (G), (M), (SG)
Solvent polyacrylate removable, grey
Double sided PE coated paper, one side siliconised, 143 g/m²
For brilliant and colourful displays for digital large-format prints in outdoor applications.
ORAJET® 3169
Transparent (G) Solvent polyacrylate, removable
Transparent (G) Solvent polyacrylate, removable
ORAJET® 3451
Highly Flexible White (SG) Special PVC film, 80 micron
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
For displays on flexible substrates in outdoor applications, e.g. banners.
ORAJET® 3641
Soft PVC film, 80 micron
White (G), (M)
Polyacrylate, permanent, grey
Silicone coated paper, 135 g/m2
For brilliant and colourful displays in short- and medium-term outdoor applications.
ORAJET® 3640
Soft PVC film, 80 micron
White (G), (M) Transparent (G), (M)
Polyacrylate, permanent
Silicone coated paper, 135 g/m2
For brilliant and colourful displays in short- and medium-term outdoor applications.
ORAJET® 3621
Soft PVC film, 80 micron
White (G), (M)
Polyacrylate, removable, grey
Silicone coated paper, 135 g/m2
For brilliant and colourful displays in short- and medium-term outdoor applications.
ORAJET® 3620
Soft PVC film, 80 micron
White (G), (M) Polyacrylate, removable Transparent (G)
Silicone coated paper, 135 g/m2
For brilliant and colourful displays in short- and medium-term outdoor applications.
ORAJET® 3164XRA
Soft PVC film, 100 micron
White (G), (M)
Polyacrylate, permanent, grey
Double sided PE coated For brilliant and colourful digital advertising prints in short- and RapidAir ® paper, one medium-term outdoor applications. The RapidAir ® technology side siliconised, enables easy and rapid application without air inclusion. 143 g/m²
ORAJET® 3164X
Soft PVC film, 100 micron
White (G), (M)
Polyacrylate, permanent, grey
Silicone coated paper one side, 135 g/m2
For brilliant and colourful short- and medium-term outdoor applications.
ORAJET® 3164
Soft PVC film, 100 micron
White (G), (M) Transparent (G), (M)
Polyacrylate, permanent
Silicone coated paper one side, 135 g/m2
For brilliant and colourful short- and medium-term outdoor applications.
ORAJET® 3164HT
Soft PVC film, 100 micron
White (G), (M)
Polyacrylate, permanent, with high initial tack and high final adhesion
Silicone coated paper one side, 135 g/m2
For brilliant and colourful advertising for short- and mediumterm outdoor use. Indoor exposure is almost unlimited. The strong permanent adhesive exhibits excellent initial peel adhesion even onto apolar surfaces.
Measurement after 24 h Adhered to aluminium, short-term exposure Special sizes available upon request Under vertical outdoor exposure (normal climate of central Europe)
8
Not available in transparent matt Only in white gloss Only available in gloss Not available in transparent matt, transparent gloss and white matt
For information about ICC profiles please see www.orafol.com The films are printable with solvent-based, UV-curable and latex inkjet printers STANDARD SPLICE-FREE
Description
Digital Printing Materials / Product Overview
Recommendations
5
760 1050 1370 1520
50
+8° C
-40° C to +80° C
5
760 1050 1370 1520
50
16
+8° C
-40° C to +80° C
5
760 1050 1370 1520
50
18
+8° C
-40° C to +80° C
5
760 1050 1370 1520
50
8
+8° C
-40° C to +80° C
5
760 1050 1370 1520
50
14
+8° C
-20° C to +65° C
4
760 1370 1520
50
16
+10° C
-40° C to +80° C
4
760 1000 1050 1260
1370 1520 1600 2000
50
16
+10° C
-40° C to +80° C
4
760 1000 1050 1260
1370 1520 1600 2000
50
7
+10° C
-40° C to +80° C
4
760 1000 1260 1370
1520 1600 2000
50
7
+10° C
-40° C to +80° C
4
760 1000 1050 1260
1370 1520 1600 2000
50
14
+10° C
-40° C to +80° C
4
1050 1370 1520
16
+10° C
-40° C to +80° C
4
760 1000 1050 1260
1370 1520 1600 2000
50
16
+10° C
-40° C to +80° C
4
760 1000 1050 1260
1370 1520 1600 2000
50
22
+10° C
-40° C to +80° C
4
1370
252F
-40° C to +80° C
250AS
50
255AS
760 1050 1260 1370 1520 1600
236
8
5
200
+8° C
Lengths (m)
210 / 210DU *
18
Widths (mm)
ORAGUARD ® Laminating Films 215 / 215DU *
-40° C to +80° C
of rolls on 3”
259
+8° C
Standard sizes cores
290 / 290F / 290DU*
18
Service life (unprinted) in years
289F
Minimum Temperature application resistance temperature (no variation)
297GF
Adhesive power (FINAT-TM 1) N/25 mm (average)
293 / 293F
Technical Data
50
50
*) for UV prints we offer the special laminating films ORAGUARD ® 210DU, ORAGUARD ® 215DU and ORAGUARD ® 290DU.
9
Digital Printing Materials / Product Overview
Films for solvent based inkjet printing Product
Front Material
Colours / Adhesive surfaces Gloss (G) Matt (M) Semi-gloss (SG)
Release Liner
Areas of use
ORAJET® 3161DT
Soft PVC film, 100 micron
White (G), (M) Transparent (G)
Solvent polyacrylate, permanent
Silicone coated paper, 135 g/m2
For brilliant and colourful short- and medium-term outdoor applications. Good processing properties at low temperatures.
ORAJET® 3162XRA
Soft PVC film, 100 micron
White (G), (M)
Polyacrylate, removable, grey
Double sided PE coated RapidAir ® paper, one side siliconised, 143 g/m²
For brilliant and colourful digital advertising prints in short- and medium-term outdoor applications. The RapidAir ® technology enables easy and rapid application without air inclusion.
ORAJET® 3162X
Soft PVC film, 100 micron
White (G), (M)
Polyacrylate, removable, grey
Silicone coated paper, 135 g/m2
For brilliant and colourful short- and medium-term outdoor applications.
ORAJET® 3162
Soft PVC film, 100 micron
White (G), (M) Transparent (G), (M)
Polyacrylate, removable
Silicone coated paper, 135 g/m2
For brilliant and colourful short- and medium-term outdoor applications.
ORAJET® 3264
Soft PVC film, 200 micron
White (G)
Polyacrylate, permanent
Silicone coated paper, 135 g/m2
For brilliant and colourful short- and medium-term outdoor applications.
ORAJET® 3262
Soft PVC film, 200 micron
White (G)
Polyacrylate, removable
Silicone coated paper one side, 135 g/m2
For brilliant and colourful short- and medium-term outdoor applications.
ORAJET® 3628
Extra thick soft PVC film, 80 micron
White (G), (M) Transparent (G), (M)
Polyacrylate, easily removable
Silicone coated paper one side, 135 g/m2
For indoor applications onto wall paper, e.g. decorations and advertisements.
ORAJET® 3268
Extra thick soft PVC film, 150 micron
White (M)
Polyacrylate, easily removable
Silicone coated paper one side, 135 g/m2
For indoor applications onto wall paper, e.g. decorations and advertisements.
ORAJET® 3675
Perforated Special PVC film, 140 micron
White (G) with black backing
Solvent polyacrylate, permanent
Silicone coated paper, non- perforated, 135 g/m2
Window Graphics Film for advertising on even, transparent glass surfaces that should allow light to pass through, e.g. application on means of transportation (only with ORAGUARD ® 297GF), 50% printable area.
ORAJET® 3635
Perforated Special PVC film, 140 micron
White (G) with black backing
Solvent polyacrylate, removable
Silicone coated paper, non- perforated, 135 g/m2
Window Graphics Film for advertising on even, transparent glass surfaces that should allow light to pass through, e.g. application on means of transportation (only with ORAGUARD ® 297GF), 50% printable area.
ORAJET® 3676
Perforated Special PVC film, 140 micron
White (G) with black backing
Solvent polyacrylate, permanent
Silicone coated paper, non- perforated, 135 g/m2
Window Graphics Film for advertising on even, transparent glass surfaces that should allow light to pass through, e.g. application on means of transportation (only with ORAGUARD ® 297GF), 60% printable area.
ORAJET® 3636
Perforated Special PVC film, 140 micron
White (G) with black backing
Solvent polyacrylate, removable
Silicone coated paper, non- perforated one side, 135 g/m2
Window Graphics Film for advertising on even, transparent glass surfaces that should allow light to pass through, e.g. application on means of transportation (only with ORAGUARD ® 297GF), 60% printable area.
ORACAL® 1663
Highly Pigmented opaque PVC film, 110 micron
White (G), (M)
Solvent polyacrylate, removable
Silicone coated paper, 135 g/m2
For ORAFOL® Floor Graphics systems in connection with ORAGUARD ® 250AS or 255AS. Excellent opacity suppressing colour shadows of the floor surface. The adhesive guarantees clean removal.
ORACAL® 1660
Highly Pigmented Opaque PVC film, 110 micron
White (G), (M)
Polyacrylate, removable
Silicone coated paper, 135 g/m2
For marking and decoration with high demands on resistance and durability, e.g. lettering on vehicles and means of transportation.
ORACAL® 1670
Highly Pigmented Opaque PVC film, 110 micron
White (G)
Polyacrylate, permanent
Silicone coated paper one side, 135 g/m2
For marking and decoration with high demands on resistance and durability, e.g. lettering on vehicles and means of transportation.
ORAJET® 3301F
Metallised Polyester film, top-coated, 50 micron
Chrome, Solvent polyacrylate, Chrome brushed permanent, with high initial tack and high final adhesion
Silicone coated polyester film one side, 100 micron
Especially for doming applications.
ORAJET® 3350
Metallised Polyester film, top-coated, 50 micron
Chrome
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 143 g/m²
For labels, name tags, technical ID labels, moldings and safety labels.
ORAJET® 3352F
Ultra clear, Polyester film, top-coated, 70 micron
Transparent (G)
Solvent polyacrylate, removable
Silicone coated polyester film, 36 micron
For ultra clear, colourful indoor and short-term outdoor advertising efforts and glass decorations on windows.
ORAJET® 3174X 3174
Polypropylene film, 3174X: White top-coated, (G), (M) PVC-free, 3174: White (G) 100 micron
Polyacrylate permanent, grey
Silicone coated paper, 135 g/m2
For eco-friendly brilliant and colourful advertising for indoor and short-term outdoor use. Suitable for even and slightly curved surfaces (recommended: ORAGUARD ® 236).
ORAJET® 3172X
Polypropylene film, White (G) top-coated, PVC-free, 100 micron
Silicone coated paper, 135 g/m2
For eco-friendly brilliant and colourful advertising for indoor and short-term outdoor use. Suitable for even and slightly curved surfaces (recommended: ORAGUARD® 236).
Polyacrylate permanent Polyacrylate, removable, grey
Measurement after 24 h Adhered to aluminium, short-term exposure Special sizes available upon request Under vertical outdoor exposure (normal climate of central Europe)
10
xperience has shown that when graphics that have been applied to bricks are removed, a difference E in colour of the substrate between the covered and uncovered part occurs after approx. one year. This difference results from the fading of the bricks, whereby the covered part is protected from sunlight. For short-term applications it is therefore recommended to remove the film before the end of a year.
For information about ICC profiles please see www.orafol.com The films are printable with solvent-based, UV-curable and latex inkjet printers STANDARD SPLICE-FREE
Description
Digital Printing Materials / Product Overview
18
-5° C
-40° C to +80° C
4
760 1370 1520
50
6
+10° C
-40° C to +80° C
4
1050 1370 1520
50
6
+10° C
-40° C to +80° C
4
760 1000 1050 1260
1370 1520 1600 2000
50
6
+10° C
-40° C to +80° C
4
760 1000 1050 1260
1370 1520 1600 2000
50
16
+10° C
-40° C to +80° C
4
1370
50
6
+10° C
-40° C to +80° C
4
1370
50
6
+10° C
-
2
760 1370 1520
50
6
+10° C
-
2
760 1370 1520
50
12
+10° C
-40° C to +80° C
4
760 1370 1520
50
3
+10° C
-40° C to +80° C
4
760 1370 1520
25 50
12
+10° C
-40° C to +80° C
4
760 1370 1520
50
3
+10° C
-40° C to +80° C
4
760 1370 1520
50
5
+8° C
-40° C to +80° C
3
1000 1260 1370
1400 1520
50
6
+10° C
-40° C to +80° C
3
1000 1260 1370
1400 1520
50
16
+10° C
-40° C to +80° C
3
1000 1260 1370
1400 1520
50
25
+8° C
-40° C to +120° C
2
1370
25 50
12
+8° C
-40° C to +120° C
2
1370
25 50
2
+10° C
-30° C to +70° C
1
1370 1520
25 50
16
+10° C
-40° C to +80° C
2
1370
50
2
+10° C
-40° C to +80° C
2
1370
50
HDPE: 10
O nly interior use Not available in transparent matt Only in white gloss
252F
250AS
255AS
236
200
Lengths (m)
210 / 210DU *
Widths (mm)
ORAGUARD ® Laminating Films 215 / 215DU *
of rolls on 3”
259
Standard sizes cores
290 / 290F / 290DU*
Service life (unprinted) in years
289F
Minimum Temperature application resistance temperature (no variation)
297GF
Adhesive power (FINAT-TM 1) N/25 mm (average)
Recommendations
293 / 293F
Technical Data
*) for UV prints we offer the special laminating films ORAGUARD ® 210DU, ORAGUARD ® 215DU and ORAGUARD ® 290DU. ***) ORAJET® 3675, 3635, 3676 and 3636 are not printable with UV-curable inks.
11
Digital Printing Materials / Product Overview
Films for thermotransfer printing Product
Front Material
Colours / surface finish Gloss (G) Matt (M) Semi-gloss (SG)
Adhesive
Release liner
Areas of use
ORACAL® 951
Premium Cast PVC film, 50 micron
139 Colours (G) + Black (M) + White (M)
Solvent polyacrylate, permanent
Silicone coated paper one side, 137 g/m2
For displays with highest degree of brilliancy and durability in outdoor applications, e.g. vehicle lettering. Particularly suitable for rivets and corrugations.
ORACAL® 751C
High Performance Cast PVC film, 60 micron
117 colours (G) + Black (M) + White (M)
Solvent polyacrylate, permanent
Silicone coated paper one side, 137 g/m2
For displays with an excellent degree of brilliancy and durability in outdoor applications, e.g. vehicle lettering. Ideal for adhesion over rivets and to corrugations.
ORACAL® 551
High Performance Polymeric PVC film, 70 micron
98 Colours
Solvent polyacrylate, permanent
Silicone coated paper one side, 137 g/m2
For displays with a high degree of brilliancy and durability in outdoor applications.
ORACAL® 651 Intermediate
Blended Polymeric PVC film, 70 micron
56 Colours (G), (M) Solvent polyacrylate, permanent
Silicone coated paper one side, 137 g/m2
For decorative and colourful outdoor advertising.
ORACAL® 641 Economy
Soft PVC film, 75 micron
59 Colours (G), (M) Polyacrylate, permanent
Silicone coated paper one side, 135 g/m2
For decorative and colourful outdoor advertising.
ORACAL® 8500
Translucent Special PVC film, 80 micron
54 Colours (SG)
Solvent polyacrylate, permanent
Silicone coated paper one side, 137 g/m2
For illuminated outdoor displays, e.g. application on light boxes.
ORACAL® 451
Highly Flexible Special PVC film, 80 micron
23 Colours (SG)
Solvent polyacrylate, permanent
Silicone coated paper one side, 137 g/m2
For advertising on flexible surfaces in outdoor applications.
ORACAL® 1663
Highly Pigmented Special PVC film, 110 micron
White (G) (M)
Solvent polyacrylate, removable
Silicone coated paper, 135 g/m2
For floor graphics when used in connection with ORAGUARD ® laminating films 250AS or 255AS.
ORACAL® 820
Special Cast PVC film, 55 micron
White (G) (M)
Solvent polyacrylate, permanent
Double sided PE Safety film for very adherent labels suitable for official coated paper, documents. Removal and reuse is impossible. one side siliconised, 143 g/m²
For information about ICC profiles please see www.orafol.com
Description
Materials for water-based inkjet printing Product
Front Material
Colours / surface finish Gloss (G) Matt (M) Semi-gloss (SG)
Adhesive
Release liner
Areas of use
ORAJET® 1917
Special Soft PVC film with one-sided microporous waterproof inkjet coating, 140 micron
White (M)
Solvent polyacrylate, permanent
Silicone coated paper 135 g/m2
For brilliant and colourful large-format advertising. Long-term protection against UV-rays and mechanical stress when used in combination with ORAGUARD ® laminating films. If you use dye-inks, lamination is also necessary for indoor applications. For outdoor applications with direct water contact, sealing of the edges is recommended.
ORAJET® 1902
Coated paper, 120 g/m2 with one-sided special inkjet coating, 100 micron
White (M)
Polyacrylate, permanent
Silicone coated paper 80 g/m2
For inexpensive production of large-format prints for short-term indoor decoration.
Measurement after 24 h Adhered to aluminium, short-term exposure Special sizes available upon request
12
olours available on request C Under vertical outdoor exposure (normal climate of central Europe)
For information about ICC profiles please see www.orafol.com
Indoor -
Outdoor Application
Description
Digital Printing Materials / Product Overview
Technical Data of rolls
Recommended inks 1) dye inks 2) pigmented 3) oil-based 4) m ild solvent
Adhesive power (FINAT-TM 1) N/25 mm (average)
Minimum application temperature
Temperature resistance (no variation)
Service life (unprinted) in years
Standard sizes Widths (mm)
Lengths (m)
-
18
+8° C
-50° C to +120° C
10
1000
50
1000
50
1000
50
1000
50
1000
50
8 -
18
+8° C
-50° C to +120° C
8 7
-
18
+8° C
-50° C to +90° C
8 7
-
18
+8° C
-40° C to +80° C
-
16
+10° C
-40° C to +80° C
5 4 4 3
-
18 (glass) 16 (acrylic glass)
+8° C
-40° C to +90° C
7
1000
50
-
14
+8° C
-20° C to +65° C
3
1000
50
-
5
+8° C
-40° C to +80° C
3
1000 1260 1370 1400 1520
50
-
The adhesive power is higher than its tensile strength
+10° C
-40° C to +90° C
5
1000 1400
50
*) for UV prints we offer the special laminating films ORAGUARD® 210DU, ORAGUARD® 215DU and ORAGUARD® 290DU. **) ORAGUARD® 293F and 290F are covered with a release material consisting of a 36 micron polyester film. The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of information and is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications, customers should independently determine the suitability of this material for their specific purpose, prior to use.
Widths (mm)
Lengths (m)
1, 2, 3 & 4
18
+10° C
-30° C to +60° C
1
914 1070 1270 1370 1520
20
1&2
16 (tear of the paper)
+10° C
-20° C to +60° C
1
914 1070 1270
20
250AS
ORAGUARD ® Laminating Films 255AS
Standard sizes of rolls on 2” cores
236
Service life (unprinted) in years
210
Temperature resistance (no variation)
215
Minimum application temperature
290 / 290F**
Adhesive power (FINAT-TM 1) N/25 mm (average)
297GF
Recommended inks 1) dye inks 2) pigmented 3) oil-based 4) eco-solvent
200
Recommendations
293 / 293F **
Technical Data
*) for UV prints we offer the special laminating films ORAGUARD ® 210DU, ORAGUARD ® 215DU and ORAGUARD ® 290DU. **) ORAGUARD ® 293F and 290F are covered with a release material consisting of a 36 micron polyester film. The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of information and is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications, customers should independently determine the suitability of this material for their specific purpose, prior to use.
13
Digital Printing Materials / Product Overview
Laminating Films Description Product
Front Material
Colours / Surface Finish Gloss (G), Semi-gloss (SG), Matt (M), High-gloss (HG), Sand-grain structure (SO)
Adhesive
Release liner
ORAGUARD ® 289F
Premium Polyurethane High Performance Laminating film, 50 micron
Transparent (G)
Solvent polyacrylate, permanent
Silicone-coated polyester film, 36 micron
ORAGUARD ® 293
Premium Cast PVC film, 30 micron, ultra flexible with highest level of UV-protection
Transparent (G), (M)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 293F
Premium Cast PVC film, 30 micron, ultra flexible with highest level of UV-protection
Transparent (G)
Solvent polyacrylate, permanent
Silicone coated polyester film, 36 micron
ORAGUARD ® 293AC
Perforated, Premium Cast PVC film, 30 micron, ultra-flexible with highest level of UV-protection
Transparent (G)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 290
Premium Cast PVC film, 50 micron, with highest level of UV-protection
Transparent (G), (M)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 290F
Premium Cast PVC film, 50 micron, with highest level of UV-protection
Transparent (G)
Solvent polyacrylate, permanent
Silicone coated polyester film, 36 micron
ORAGUARD ® 290DU
Premium Cast PVC film, 50 micron, with highest level of UV protection
Transparent (G)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 297GF
Premium Cast PVC film, 70 micron, with highest level of UV-protection
Transparent (G)
Solvent polyacrylate, permanent
Silicone coated polyester film, 36 micron
ORAGUARD ® 259
Premium Cast PVC film, 55 micron, with highest level of UV protection
Transparent (G)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 252F
Ultra Clear Premium Cast PVC film, 50 micron, with highest level of UV-protection
Highly transparent (G)
Solvent polyacrylate, permanent
Silicone coated polyester film, 75 micron
ORAGUARD ® 255AS
Special PVC film, 170 micron
Transparent, raised non-skid surface
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 250AS
Special PVC film, 120 micron
Transparent, raised non-skid surface
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 215
Polymeric PVC film, 75 micron, with high-level of UV-protection
Transparent (G), (SG), (M)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 215DU
Polymeric PVC film, 75 micron, with high-level of UV-protection
Transparent (G), (M)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 210
Soft PVC film, 70 micron, with high-level of UV-protection
Transparent (G), (SG), (M), (SO)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 210DU
Soft PVC film, 70 micron, with high-level of UV-protection
Transparent (G), (M)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 200
Soft PVC film, 70 micron, with high-level of UV-protection
Transparent (G), (SG), (M)
Polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 244G
Special ETFE film, 70 micron, with high-level of UV-protection
Highly transparent (G)
Solvent polyacrylate, permanent
Silicone coated polyester film, 75 micron
ORAGUARD ® 372
Special Polyester film, 23 micron, with high-level of UV-protection
Transparent (HG)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 160 g/m2
ORAGUARD ® 373
Special Polyester film, 25 micron, with high-level of UV-protection
Transparent (HG)
Solvent polyacrylate, permanent
Double sided PE coated paper, one side siliconised, 155 g/m2
ORAGUARD ® 220HG
Polyester film, 36 micron, with high-level of UV-protection
Transparent (HG)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 221HG
Polyester film, 75 micron, with high-level of UV-protection
Transparent (HG)
Solvent polyacrylate, permanent
Silicone coated paper, 90 g/m2
ORAGUARD ® 236
Polypropylene film, 60 micron, with effective UV-protection, PVC-free
Highly transparent (G)
Polyacrylate, permanent
Silicone coated paper, 90 g/m2
Measurement after 24 h Adhered to aluminium, short-term exposure Special sizes available upon request
14
lso available with double sided covering A 210 (SO) not available in 760, 1400 mm and 1550 mm. O nly available with gloss surface
Not available in semi-gloss Not available in sand-optic and semi-gloss Not available in sand-optic
Digital Printing Materials / Product Overview
Technical Data of
Minimum Adhesive Temperature power application resistance (FINAT-TM 1) temperature (no variation) N/25 mm (average)
Additional UVprotection ** in years
Standard sizes rolls Widths (mm)
Lengths (m)
For the protection of large-format indoor and outdoor graphic applications. Recommended in combination with ORAJET® 3981RA+.
12
+8° C
-50° C to +100° C
+5
1370 1550
50
For indoor and outdoor protection of large-format digital prints. Because of its very good conformability especially to rivets and corrugations, ORAGUARD ® 293 is recommended for car wrapping in combination with ORAJET® 3951 and 3951RA+.
12
+8° C
-50° C to +110° C
+4
760 1050 1370
1400 1550
50
For indoor and outdoor protection of large-format digital prints. Because of its very good conformability especially to rivets and corrugations, ORAGUARD® 293 is recommended for car wrapping in combination with ORAJET® 3951 and 3951RA+.
12
+8° C
-50° C to +110° C
+4
760 1050 1370
1400 1550
50
In combination with ORAJET® 3967AC Aircraft Graphic Film for the short-term exterior 12 protection of large-format digital prints on aircrafts.
+8° C
-50° C to +110° C
+2
1550
For the protection of digitally printed large-format pictures in indoor and outdoor applications. In combination with respective ORAJET® digital printing films esp. for car livery and wrapping.
12
+8° C
-50° C to +110° C
+4
760 1050 1300
1370 1400 1550
50
For the protection of digitally printed large-format pictures in indoor and outdoor applications. Should be used in combination with the appropriate ORAJET® digital printing films, esp. for car livery and wrapping.
12
+8° C
-50° C to +110° C
+4
760 1050 1300
1370 1400 1550
50
For the protection of digitally printed large-format pictures in indoor and outdoor applications. Especially recommended for use on UV digital printing.
14
+8° C
-50° C to +110° C
+4
1050 1300
1370 1550
50
Developed for the protection of printed ORAJET® Window Graphics Film. The laminating film with its optimised hardness covers the perforated film so that no humidity, dust or other contaminants can penetrate the perforation of the film.
12
+8° C
-50° C to +110° C
+4
1370 1400
1550
50
In combination with the petrol resistant digital printing film ORAJET® 3959 this laminating film is particularly suited for long-term advertising applied near fuel pumps, e.g. on gas tanks or on tankers or trucks.
14
+8° C
-50° C to +110° C
+4
1370 1550
50
For the protection of digitally printed large-format pictures in indoor and outdoor applications. Recommended in combination with ORAJET® 3952F.
12
+8° C
-30° C to +70° C
+4
1370 1520
50
With its high resistance to skidding and abrasion, this product is especially suitable for the protection of floor graphics. Extremely stress resistant.
12
+8° C
-40° C to +80° C
-
1050 1300
1400 1550
50
With its high resistance to skidding and abrasion, this product is especially suitable for the protection of floor graphics.
12
+8° C
-40° C to +80° C
-
950 1050 1300
1370 1400 1550
50
For the protection of digitally printed large-format pictures in indoor and outdoor applications.
12
+8° C
-50° C to +90° C
+3
760 950 1050 1300
1370 1400 1550 1600
50
For the protection of digitally printed large-format pictures in indoor and outdoor applications. Especially recommended on UV digital printings.
14
+8° C
-50° C to +90° C
+3
760 1050 1300
1370 1400 1550
50
For the protection of digitally printed large-format pictures in indoor and outdoor applications.
12
+8° C
-40° C to +80° C
+2
760 950 1050 1300
1370 1400 1550
50
For the protection of digitally printed large-format images in indoor and outdoor applications. Especially recommended for use on UV digital printing.
14
+8° C
-40° C to +80° C
+2
1050 1300 1370
1400 1550
50
For the protection of digitally printed large-format pictures in indoor and outdoor applications.
10
+10° C
-40° C to +80° C
+1
760 950 1050 1300
1370 1400 1550
50
Excellent protection against graffiti and environmental influences in indoor and outdoor applications (Anti Graffiti Film) on even and slightly curved surfaces.
12
+8° C
-50° C to +90° C
+3
1260
Surface protection especially against graffiti and environmental influences in indoor and outdoor applications (Anti Grafitti Film) on even surfaces.
12
+8° C
-40° C to +120° C
+2
1000 1260
Surface protection especially against graffiti and environmental influences in indoor and outdoor applications (Anti Grafitti Film) on even surfaces.
12
+10° C
-40° C to +120° C
+5
1260 1370
For indoor and outdoor protection of large-format digital prints on even surfaces.
12
+8° C
-40° C to +120° C
+2
1050 1300
1400 1550
50
For indoor and outdoor protection of large-format digital prints on even surfaces. Provides a maximum value of brilliancy and luminosity.
12
+8° C
-40° C to +120° C
+2
1050 1300
1400 1550
50
For the eco-friendly protection of large digital prints for indoor and short-term outdoor use. Especially recommended in combination with ORAJET® 3174, 3174X and 3172X.
12
+10° C
-40° C to +80° C
+1
1370
Areas of Use *
50
50 1370 1400
50
50
50
*) Laminating films increase the life of digitally printed pictures and graphics. In addition, they protect these against UV-A, -B and -C rays and abrasion. The life of a printed overlaminated film essentially depends on the materials (inks, resin or ribbons), their quality (durability and UV-resistance, please see product specifications of the manufacturers), their drying degree, curing times and on the conditions of their applications and use. Customers must carry out their own tests before use. **) The ORAFOL® data refers to the life of an unprotected picture which has the durability of one year (normal Central European climate).
15
Digital Printing Materials / Product Overview
Mounting Films Description Product
Front Material
Colours
Adhesive
Release liner
ORABOND ® 1375
None
Transparent
Pure acrylic
Double sided silicone coated PE paper, brown, 100 g/m2
ORABOND ® 1375S
None
Transparent
Pure acrylic
Double sided silicone coated PE paper, brown, 100 g/m2
ORABOND ® 1377
None
Transparent
Pure acrylic
Double sided silicone coated PE paper, brown, 100 g/m2
ORABOND ® 1377S
None
Transparent
Pure acrylic
Double sided silicone coated PE paper, brown, 100 g/m2
ORABOND ® 4052
Polyester film, 12 micron
Transparent
Polyacrylate (permanent, pH-neutral)
Double sided silicone coated PE paper, white, 120 g/m2
ORABOND ® 4032
Polyester film, 12 micron
Transparent
Covered side: Solvent polyacrylate, removable Open side: Solvent polyacrylate, permanent
Double sided silicone coated PE paper, white, 120 g/m2
ORABOND ® 4040
Polyester film, 12 micron
Transparent
Double sided polyacrylate, permanent
Double sided siliconised glassine paper, white, 90 g/m2
ORABOND ® 1395TM
Polyester film, 12 micron
Transparent
Double sided modified solvent acrylic adhesive, permanent
Double sided silicone coated paper, white with blue ORAFOL branding, 90 g/m²
ORABOND ® 1397PP
Polyester film, 12 micron
Transparent
Double sided modified solvent acrylic adhesive, permanent
Double sided siliconized polypropylene film, 80 micron, red
ORABOND ® 1392TM
Hard PVC film, 38 micron
White
Double sided modified solvent acrylic adhesive, permanent
Double sided silicone coated paper, white with blue ORAFOL branding, 90 g/m²
ORABOND ® 3331TG
Hard PVC film, 38 micron
White
Double sided modified solvent acrylic adhesive, permanent
Double sided silicone coated paper, white with green ORAFOL branding, 90 g/m2
ORABOND ® 1810
PE foam, 1000 micron
White
Double sided modified solvent acrylic adhesive, permanent
Double sided silicone coated PE paper, blue, 140 g/m2
ORABOND ® 1811
PE foam, 1000 micron
White
Double sided modified solvent acrylic adhesive, permanent
Double sided silicone coated paper, blue, 90 g/m2
ORABOND ® 1812TM
PE foam, 1000 micron
White
Double sided modified solvent acrylic adhesive, permanent
Double sided silicone coated paper, white with blue ORAFOL branding, 90 g/m2
ORABOND ® 1831TM
PE foam, 1000 micron
White
Double sided solvent rubber adhesive, permanent
Double sided silicone coated paper, white with blue ORAFOL branding, 90 g/m2
ORABOND ® 1819TM
PE foam, 2000 micron
White
Double sided modified solvent acrylic adhesive, permanent
Double sided silicone coated paper, white with blue ORAFOL branding, 90 g/m2
ORABOND ® 1399TM
Paper tissue, 12,7 g/m2
White
Double sided modified solvent acrylic adhesive, permanent
Double sided silicone coated paper, white with blue ORAFOL branding, 90 g/m2
ORABOND ® 1459
Paper tissue, 12,7 g/m2
White
Double sided solvent rubber adhesive, permanent
Double sided silicone coated paper, brown, 80 g/m2
Measurement after 24 h Adhered to aluminium, short-term exposure Special sizes available upon request
16
lso available with double sided covering as 4052D, 4032D, 4040D A and available as sheets
Digital Printing Materials / Product Overview
Technical Data Areas of Use
of
Adhesive power (FINAT-TM 1) N/25 mm (average)
Minimum application temperature
Temperature resistance (no variation)
Standard sizes rolls Widths (mm)
Lengths (m)
For signs, decorations, front plates and displays; for smooth or lightly porous surfaces.
20
+18° C
-40° C to +170° C
305 610 1220
50
Ideal as an adhesive medium for signs, decorations, front plates and displays that require an extremely high shear strength, adhesion strength and temperature resistance. For adhesion to smooth or lightly porous surfaces.
20
+18° C
-40° C to +170° C
Sheets: 610 x 914
For signs, decorations, front plates and displays; for smooth or lightly porous surfaces.
24
+18° C
-40° C to +170° C
Ideal as an adhesive medium for signs, decorations, front plates and displays that require an extremely high shear strength, adhesion strength and temperature resistance. For adhesion to smooth or lightly porous surfaces.
24
+18° C
-40° C to +170° C
Sheets: 610 x 914
Mounting film for self-adhesive protection of smooth surfaces.
11
+8° C
-40° C to +150° C
1050 1300 1550
50
Mounting film for self-adhesive protection of smooth surfaces. The adhesive is guaranteed to be removable without leaving a residue, within 2 years of outdoor application.
Open side: 11 Covered side: 2
+8° C
-40° C to +120° C
1050 1300 1550
50
Mounting film for self-adhesive protection of smooth surfaces.
11
+8° C
-40° C to +150° C
1050 1300 1550
50
For the attachment of signs, covers, scales, metal and plastic films and for general fixing.
28
+15° C
-40° C to +160° C
12 19 25 50
1000 1260 1550
50
POP displays, outdoor signs, banners, APET, fluted PP board, Falcon foam, Lexan, hi-impact Styrene etc., which have to be very stress-resistant.
35
+15° C
-40° C to +160° C
12 19 25 38 50
100 1000 1260 1372
50
For the installation of heavy displays.
38
+15° C
-40° C to +70° C
12 19 25 50
1000 1260
50
Used for the secure attachment of truck and car mirrors in plastic housings. Used as an adhesive medium for type, performance and information signs as well as for extruded synthetic profiles and for durable installation in the furniture industry. Used for the attachment of trims, bars and laminates to a variety of surfaces. For the fixing of covers and handles in the audio, household appliance and electrical industry.
37
+15° C
-40° C to +70° C
12 19 25 38 50
100 1000 1372
50
Used for the installation of mirrors in the furniture and sanitary industry. For adhesion of aluminium, steel and GRP outer skins during the construction of truck containers, and fixing of type and capacity signs as well as displays and product prototypes in the advertising industry. For the fixing of panels and handles in the appliance and electrical industry. Ideal for use in exhibitions, conferences and interior fit-outs.
foam tear > 16
+18° C
-40° C to +95° C
12 19 25 50
1250
50
For the installation of heavy displays, adheres well even to rough and difficult surfaces.
foam tear > 18
+15° C
-40° C to +90° C
12 15 19 25 30 38
50 60 75 100 1250
50
For the installation of spray cast and extruded plastic parts such as panels, bars and ducts, as well as plexiglass mirrors for interior fit-outs and displays. For use as an adhesive medium for hooks, signs, handles and dispensers. Ideal for exhibitions, conferences and interior fit-outs. Due to good UV, water and age resistance this product is also suitable for external applications.
foam tear > 18
+15° C
-40° C to +100° C
12 19 25 50
1250
50
For fixing of boards, displays and for a variety of household applications. A universal, economical product. Good adhesion also on rough surfaces.
foam tear > 18
+15° C
-30° C to +70° C
12 19 25
50 1250
50
For the installation of spray cast and extruded plastic parts such as panels, bars and ducts, as well as plexiglass mirrors for interior fit-outs and displays. For use as an adhesive medium for hooks, signs, handles and dispensers on even surfaces. Due to good UV, water and age resistance this product is also suitable for external applications.
foam tear > 19
+15° C
-40° C to +100° C
12 19 25 50
1250
33
Used as an adhesive medium for polyethylene, polyester, and polyether foams as well as for the extension and splicing of paper, textiles, plastic and metal films where high shear strength, adhesion strength and temperature resistance are required.
35
+15° C
-40° C to +140° C
12 19 25
38 50 1000
50
This tape is especially suitable as a self-adhesive medium for large pore, rough surface, fibrous material and foams as well as materials such as glass and paper. Limited consistency in the presence of chemicals inclined to migrate (plasticisers).
21
+15° C
-40° C to +70° C
12 15 19 25 30
50 75 100 1000 1200
50
25 50 305
610 1220
50
The statements in this catalogue are based upon our knowledge and practical experience. This data is intended only as a source of information and is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications, customers should independently determine the suitability of this material for their specific purposes, prior to use.
17
“
Digital Printing Materials
ORAFOL provides global excellence through technology, quality and service.
Digital Printing Materials / Notes on Processing and Handling
Notes on Processing and Handling Introduction ORAFOL offers a wide range of self-adhesive digital printing materials for many different applications. They come with a well-matched set of laminating films. To ensure that the films display the specified properties, it is important to follow the instructions for preparation and application which can be found on www.orafol. com. If you want to apply an ORAFOL material on a car, please also see our practical information for self-adhesive films for application on cars (can be downloaded also on www.orafol.com). ORAFOL recommends to use only material with the same batch number for one graphical application. In this context ORAFOL ensures that every roll of the same batch number consists of the same material and consequently does not have any splices. When different batch numbers are used the technician should conduct tests to find out possible differences in using the films and in the quality of the graphical application. Storage and Processing Conditions The self-adhesive products which ORAFOL supplies in rolls should at all times be stored either suspended (with end caps) or standing on end on the roll blocks, and never lying flat (without end caps). For storage and processing, they should be kept in a cool dry place, protected from daylight. Relative air humidity between 50% and 60% and a temperature between +18° C and +22° C should be ensured. Direct sunlight, storage beside radiators etc. should by all means be avoided. Please observe the shelf life instructions contained in the technical data sheet accompanying each film. Instructions for Printing The digital printing materials should generally be handled with a high degree of care. Cotton gloves should be used to prevent damage to the surface or soiling. Check the surface quality prior to printing or application. Also check the print file with profiling. The ORACAL® / ORAJET® digital printing media require (due to their different qualities like the thickness of the adhesive layer) different parameter settings of the printer and the selecting software (RIP). Make sure you take the relevant amount of ink and specific colour definitions into account. In addition, check the specifications of the digital printing materials and the inks for their respective applications (indoor / outdoor) and durability, and match them accordingly. Drying up Freshly printed films should be spread out and left to dry after printing, to allow the residual solvent to evaporate. If freshly printed vinyls are plotted in the printed areas, the vinyl might shrink. Depending on the ink used, laminating too early may affect the functionality of the film (adhesive power, service life) by preventing residual solvents to evaporate. Printed and non-sufficiently dried films shrink after printing, during the drying process.
If the drying process of the vinyls takes place after application of the substrate, the film may shrink and come off at the edges, from corrugations and rivets. Following these processing and handling instructions, we recommend to spread out and dry the film for at least 72 hours (lying flat or hanging). Lamination Lamination of inkjet prints is recommended to ensure longer lives at optimum quality (gloss, colour depth, mechanical damage). ORAGUARD® laminating films enhance the colour effect for the desired appearance of the surface (glossy, matt, semi-gloss), provide excellent protection against the UV-rays of the sun destroying the colour pigments, and against humidity and abrasion. Soiling can easily be removed by using common cleaning agents. We recommend only using films of the same manufacture and type (e.g. monomeric PVC film on monomeric PVC film, and polymeric PVC film on polymeric PVC film) as their raw materials are accurately matched with each other. Lamination has to be done stress free to prevent a deformation of the film compound. For the same reason we recommend to ensure that the temperature of the compactor is not higher than +30° C. Furthermore, we refer to our list of recommendations for complementary application of the printing materials in inkjet and thermotransfer printing, and to the specific laminating films provided for their surface protection. For product information about ORAGUARD® laminates, please see www.orafol.com. Application The application is described in the practical information for plotter films. For application onto cars, please see in addition the practical information on how to apply self-adhesive films on cars. For application onto car windows, the remarks in the practical information for self-adhesive films for application onto cars are to be followed. Removability Please see the practical information for plotter films. General Information ORAFOL provides information on ICC profiles for various printers. Please go to www.orafol.com. The information in here is based on our knowledge and experience. We cannot cover all variations on application methods. Specialised or occupational knowledge and competence of a professional sign maker is presupposed. Due to the diversity of potential influencing factors during application and use, we recommend customers who wish to use the films for special applications to make their own tests of our products. No legally binding warranty of certain qualities can be derived from our information. 19
Engineered to Achieve Perfection™
Tel: +49 (0)3301 864-0 / graphic.innovations@orafol.de Find out more about our products at: www.orafol.com · www.orafoleurope.com
YSTEM C ER TS EN
ATION FIC TI
ORAFOL Europe GmbH Orafolstraße 1, D-16515 Oranienburg, Germany
MANAGE M
Digital Printing Materials
ISO 9001 ISO 14001 ISO 50001
© ORAFOL Europe GmbH. ORACAL®, ORAJET® and ORAGUARD® are registered trademarks of ORAFOL Europe GmbH. - 48201-002 (10/2021)