Side Marking

Partial contour marking on vehicles exceeding 6,000 mm in length of the following categories:

  • N2 with a maximum mass exceeding 7.5 tonnes and N3 (with the exception of chassis-cabs, incomplete vehicles and tractors for semi-trailers)
  • O3 and O4

Full contour marking may be applied instead of the mandatory partial contour marking.

The retroreflective marking tapes must be approved according to ECE 104 Class "C". 

_____________________________________________________________________________________________________________

Rear Marking

Full rear end contour marking on vehicles exceeding 2,100 mm in width of the following categories:

Trucks: N2 with a maximum mass exceeding 7.5 tonnes and N3 (with the exception of chassis-cabs, incomplete vehicles and tractors for semi-trailers)
Trailers: O3 and O4

However, where the shape structure, design or operational requirements make it impossible to install the mandatory contour marking, a line marking may be installed.

The retroreflective marking tapes must be approved according to ECE 104 Class "C". 

_____________________________________________________________________________________________________________

Overview of Vehicle Categories

If you need an overview of what the different vehicle categories cover (i.e. M1 / N2 / O3 etc), you can download this here.